Protect the interior of your aircraft while you prime surfaces for epoxy application using PPG PRC-DeSoto Koropon Epoxy Primer from SkyGeek. The high-quality primer is sold in a one-quart can and is designed to go on smoothly and adhere well to a variety of surfaces. Use the primer on interior walls, doors, fixtures and more. The primer also helps protect against corrosion and unnecessary wear to keep your aircraft looking new. The primer can be used on any non-electrostatic surface and may be applied using a brush or sprayer. The primer cures quickly at room temperature.
515K011 Super Koropon fluid resistant interior primers are qualified to the following specifications:
207-9-436 Classification C A8B91-S BAMS 565-001 Class A Grade A BMS 10-11 Type I Class A Grade A EMS 93284 Type I Class A LES 1091 MEP 10-059 RM 11-0018-1288-9 RMS 118
| Typical Application & Performance Properties | | | Application Temperature | 65°-95°F (18.3°-35°C) | | Application Humidity | 18%-95% | Mix Ratio (by volume)
515-700 (Base)
910-704 (Activator) |
1 part
1 part | Viscosity
Initial (#1 Zahn cup)
Pot Life (8 hours) |
26 to 35 seconds
10 second max. rise | | VOC, EPA method 24 | 650 grams/l | | Dry Film Density | 0.00956 lbs./square ft. @ 1.0 mil dry film | | Theoretical Coverage | 352 square ft./gal. @ 1.0 mil dry film | | Recommended Dry Film Thickness | 0.5 to 0.9 mils (12.5 - 22.5 microns) | Drying Times @ 75°F (23.9°C)
Tack free
Air dry to stack
Dry to tape
Dry through
Dry to topcoat
Dry to fly
Full cure |
30 min. max.
45 min.
2 hours
4 hours
1 to 24 hours
48 hours
7 days | | Accelerated Cure | 15 minutes flash off @ 75°F (23.9°C), then 40 to 45 minutes at 140°F (60°C) | | Color | Light Green | | Spray Equipment | Compatible with all forms of non-electrostatic spray equipment | | Shelf Life | 24 months from date of manufacture | | Service Temperature | -65°F - 350°F (-54°C - 176.7°C) - Conforms | | Flexibility | 1/8" (3.12 mm) dia Conical Mandrel - Conforms | Impact Resistance
50inch/lbs., (forward)
30 inch/lbs., (reverse) |
Conforms
Conforms | Film Hardness
F pencil minimum |
Conforms | Fluid Resistance
Skydrol (LD-4), 30 days @ 77°F (25°C)
Distilled H20, 7 days @ 77°F (25°C)
TT-S-735 Type III, 30 days @ 77°F (25°C)
MIL-H-5606, 30 days @ 77°F (25°C)
MIL-L7808, 30 days @ 77°F (25°C)
|
Conforms
Conforms
Conforms
Conforms
Conforms | Corrosion
Salt Spray | Passes 3000 hours - Conforms | | Filiform | Passes 30 days @ 100°F (37.8°C) and 85% RH - Conforms | | Dissimilar Metals | 5% salt spray for 2000 hours - Conforms | | Magnesium corrosion | 5% salt spray for 200 hours - Conforms | |
Safety Data Sheet
INTERNATIONAL SHIPPING
HAZMAT ORDERS
Country of Origin