Flamemaster CS-3201 A-1/2 Tan AMS-S-7124B (no QPL) Spec Integral Fuel Tank and Cabin Sealant - 6 oz (3.5 fl oz) Kit

Our Part #: SGP106563
Manufacture Part #: CS3201A1-2TAN6OZ
Our Price: $35.39 (Each)

Bulk Shop & Save

  • 12 - 23 $34.91 (Each)
  • 24 - 35 $34.44 (Each)
  • 36 - 47 $33.98 (Each)
  • 48 + $33.53 (Each)
Hazmat Order iconHAZMAT ORDERS
Safety Data Sheet download icon

SkyGeek Shelf-Life Policy

Warning: This product may contain a chemical known by the State of California to cause health issues. Details found here www.p65warnings.ca.gov

UN Number: UN1133

UN Class: 3

World wide icon INTERNATIONAL SHIPPING

SkyGeek welcomes international orders!

Please note: such orders are funneled into our NY warehouse and may take an extra 7-10 days to process. The benefit to this: You get one package shipped which reduces added taxes and duties that may be incurred from multiple shipments.

Approvals and Conformities

Approvals and Conformities

SAE Spec#
AMS-S-7124 Rev. B (no QPL)

Product Attributes

Country of Origin
United States
Size
6 oz
Shipping Weight
0.45 pounds
ECCN
EAR99
Color Family
Tan
Manufacturer P/N
CS-3201 Class A-1/2 Tan
Schedule B Code
3506.91.0000
Pack Quantity
1
Size
6 oz (3.5 fl oz) Cartridge Kit
Spec
AMS-S-7124B (no QPL)
Class
A-1/2
Color
Tan
Flamemaster CS-3201 A-1/2 Tan AMS-S-7124B (no QPL) Spec Integral Fuel Tank and Cabin Sealant - 6 oz (3.5 fl oz) Kit

Features

  Class A Class B
Color
Base Compound White or Black White
Curing Agent Brown Brown
Mixed Tan or Black Tan
Non Volatile Content 90% 98%
Viscosity: Base Compound (Brookfield
Spindle #5 @ 10 RPM) 200 Poises
(Brookfield Spindle #7 @ 2 RPM) 11,000 Poises
Mixing Ratio 100:7.5 100:10
Vertical Flow 0.15 inches
Hours Application Life Tack Free Time Hours Cure to 30 REX Hours
  Class A Class B Class A Class B
1/4 6 3 24 24
½ 9 6 30 30
2 24 24 44 48
4 30 30 60

72

SURFACE PREPARATION

To obtain good adhesion, remove all traces of oil, wax, grease, dirt, or other contamination. This is done by wiping with a clean oil free solvent. Clean only small areas at one time and wipe dry with a clean cloth before the solvent evaporates. Maintain a clean solvent supply.

MIXING INSTRUCTIONS

When mixing pre-packaged kits the entire contents of base compound (Part A) and curing agent (Part B) should be used. For small quantities mix by weight to ratio indicated in Fig. 1 Applications Properties. The lip of Part A container should be removed to facilitate mixing. Next stir Part B in its original container until it is homogeneous. Add Part B to Part A and mix thoroughly for seven to ten minutes or until uniform in color. Scrape sides and bottom of the container to assure a complete mix. CS 3201 may be mixed by hand or with a mechanical mixer. When using a mechanical mixer, use low speeds since high speeds will generate internal heat and reduce application life.

APPLICATION INSTRUCTIONS

CS 3201, Class A may be applied with a brush. CS 3201, Class B may be applied with a pressure gun or a spatula. Specified application lives are based on the standard conditions of 77 deg. F and 50% relative humidity. Higher humidity will reduce the application life. Lower temperatures or lower humidity will extend the application life. For every 10 deg. F rise the application is reduced by one half, for every 10 deg. F drop, it is doubled.

CURE

The cure period is dependent on the application life, temperature, and relative humidity. Increased temperature and increased relative humidity will speed cure. Reduced temperature and reduced relative humidity will slow cure. Cure may be accelerated by heating up to 120 deg. F. Material should be firm rubber in 3 hours.

Downloads

download icon Safety Data Sheet

Product Attributes

Approvals and Conformities

SAE Spec#
AMS-S-7124 Rev. B (no QPL)

Product Attributes

Country of Origin
United States
Size
6 oz
Shipping Weight
0.45 pounds
ECCN
EAR99
Color Family
Tan
Manufacturer P/N
CS-3201 Class A-1/2 Tan
Schedule B Code
3506.91.0000
Pack Quantity
1
Size
6 oz (3.5 fl oz) Cartridge Kit
Spec
AMS-S-7124B (no QPL)
Class
A-1/2
Color
Tan
Flamemaster CS-3201 A-1/2 Tan AMS-S-7124B (no QPL) Spec Integral Fuel Tank and Cabin Sealant - 6 oz (3.5 fl oz) Kit

Features

  Class A Class B
Color
Base Compound White or Black White
Curing Agent Brown Brown
Mixed Tan or Black Tan
Non Volatile Content 90% 98%
Viscosity: Base Compound (Brookfield
Spindle #5 @ 10 RPM) 200 Poises
(Brookfield Spindle #7 @ 2 RPM) 11,000 Poises
Mixing Ratio 100:7.5 100:10
Vertical Flow 0.15 inches
Hours Application Life Tack Free Time Hours Cure to 30 REX Hours
  Class A Class B Class A Class B
1/4 6 3 24 24
½ 9 6 30 30
2 24 24 44 48
4 30 30 60

72

SURFACE PREPARATION

To obtain good adhesion, remove all traces of oil, wax, grease, dirt, or other contamination. This is done by wiping with a clean oil free solvent. Clean only small areas at one time and wipe dry with a clean cloth before the solvent evaporates. Maintain a clean solvent supply.

MIXING INSTRUCTIONS

When mixing pre-packaged kits the entire contents of base compound (Part A) and curing agent (Part B) should be used. For small quantities mix by weight to ratio indicated in Fig. 1 Applications Properties. The lip of Part A container should be removed to facilitate mixing. Next stir Part B in its original container until it is homogeneous. Add Part B to Part A and mix thoroughly for seven to ten minutes or until uniform in color. Scrape sides and bottom of the container to assure a complete mix. CS 3201 may be mixed by hand or with a mechanical mixer. When using a mechanical mixer, use low speeds since high speeds will generate internal heat and reduce application life.

APPLICATION INSTRUCTIONS

CS 3201, Class A may be applied with a brush. CS 3201, Class B may be applied with a pressure gun or a spatula. Specified application lives are based on the standard conditions of 77 deg. F and 50% relative humidity. Higher humidity will reduce the application life. Lower temperatures or lower humidity will extend the application life. For every 10 deg. F rise the application is reduced by one half, for every 10 deg. F drop, it is doubled.

CURE

The cure period is dependent on the application life, temperature, and relative humidity. Increased temperature and increased relative humidity will speed cure. Reduced temperature and reduced relative humidity will slow cure. Cure may be accelerated by heating up to 120 deg. F. Material should be firm rubber in 3 hours.

Downloads

download icon Safety Data Sheet

Description

Approvals and Conformities

SAE Spec#
AMS-S-7124 Rev. B (no QPL)

Product Attributes

Country of Origin
United States
Size
6 oz
Shipping Weight
0.45 pounds
ECCN
EAR99
Color Family
Tan
Manufacturer P/N
CS-3201 Class A-1/2 Tan
Schedule B Code
3506.91.0000
Pack Quantity
1
Size
6 oz (3.5 fl oz) Cartridge Kit
Spec
AMS-S-7124B (no QPL)
Class
A-1/2
Color
Tan
Flamemaster CS-3201 A-1/2 Tan AMS-S-7124B (no QPL) Spec Integral Fuel Tank and Cabin Sealant - 6 oz (3.5 fl oz) Kit

Features

  Class A Class B
Color
Base Compound White or Black White
Curing Agent Brown Brown
Mixed Tan or Black Tan
Non Volatile Content 90% 98%
Viscosity: Base Compound (Brookfield
Spindle #5 @ 10 RPM) 200 Poises
(Brookfield Spindle #7 @ 2 RPM) 11,000 Poises
Mixing Ratio 100:7.5 100:10
Vertical Flow 0.15 inches
Hours Application Life Tack Free Time Hours Cure to 30 REX Hours
  Class A Class B Class A Class B
1/4 6 3 24 24
½ 9 6 30 30
2 24 24 44 48
4 30 30 60

72

SURFACE PREPARATION

To obtain good adhesion, remove all traces of oil, wax, grease, dirt, or other contamination. This is done by wiping with a clean oil free solvent. Clean only small areas at one time and wipe dry with a clean cloth before the solvent evaporates. Maintain a clean solvent supply.

MIXING INSTRUCTIONS

When mixing pre-packaged kits the entire contents of base compound (Part A) and curing agent (Part B) should be used. For small quantities mix by weight to ratio indicated in Fig. 1 Applications Properties. The lip of Part A container should be removed to facilitate mixing. Next stir Part B in its original container until it is homogeneous. Add Part B to Part A and mix thoroughly for seven to ten minutes or until uniform in color. Scrape sides and bottom of the container to assure a complete mix. CS 3201 may be mixed by hand or with a mechanical mixer. When using a mechanical mixer, use low speeds since high speeds will generate internal heat and reduce application life.

APPLICATION INSTRUCTIONS

CS 3201, Class A may be applied with a brush. CS 3201, Class B may be applied with a pressure gun or a spatula. Specified application lives are based on the standard conditions of 77 deg. F and 50% relative humidity. Higher humidity will reduce the application life. Lower temperatures or lower humidity will extend the application life. For every 10 deg. F rise the application is reduced by one half, for every 10 deg. F drop, it is doubled.

CURE

The cure period is dependent on the application life, temperature, and relative humidity. Increased temperature and increased relative humidity will speed cure. Reduced temperature and reduced relative humidity will slow cure. Cure may be accelerated by heating up to 120 deg. F. Material should be firm rubber in 3 hours.

Downloads

download icon Safety Data Sheet

Approvals and Conformities

Approvals and Conformities

SAE Spec#
AMS-S-7124 Rev. B (no QPL)

Product Attributes

Country of Origin
United States
Size
6 oz
Shipping Weight
0.45 pounds
ECCN
EAR99
Color Family
Tan
Manufacturer P/N
CS-3201 Class A-1/2 Tan
Schedule B Code
3506.91.0000
Pack Quantity
1
Size
6 oz (3.5 fl oz) Cartridge Kit
Spec
AMS-S-7124B (no QPL)
Class
A-1/2
Color
Tan
Flamemaster CS-3201 A-1/2 Tan AMS-S-7124B (no QPL) Spec Integral Fuel Tank and Cabin Sealant - 6 oz (3.5 fl oz) Kit

Features

  Class A Class B
Color
Base Compound White or Black White
Curing Agent Brown Brown
Mixed Tan or Black Tan
Non Volatile Content 90% 98%
Viscosity: Base Compound (Brookfield
Spindle #5 @ 10 RPM) 200 Poises
(Brookfield Spindle #7 @ 2 RPM) 11,000 Poises
Mixing Ratio 100:7.5 100:10
Vertical Flow 0.15 inches
Hours Application Life Tack Free Time Hours Cure to 30 REX Hours
  Class A Class B Class A Class B
1/4 6 3 24 24
½ 9 6 30 30
2 24 24 44 48
4 30 30 60

72

SURFACE PREPARATION

To obtain good adhesion, remove all traces of oil, wax, grease, dirt, or other contamination. This is done by wiping with a clean oil free solvent. Clean only small areas at one time and wipe dry with a clean cloth before the solvent evaporates. Maintain a clean solvent supply.

MIXING INSTRUCTIONS

When mixing pre-packaged kits the entire contents of base compound (Part A) and curing agent (Part B) should be used. For small quantities mix by weight to ratio indicated in Fig. 1 Applications Properties. The lip of Part A container should be removed to facilitate mixing. Next stir Part B in its original container until it is homogeneous. Add Part B to Part A and mix thoroughly for seven to ten minutes or until uniform in color. Scrape sides and bottom of the container to assure a complete mix. CS 3201 may be mixed by hand or with a mechanical mixer. When using a mechanical mixer, use low speeds since high speeds will generate internal heat and reduce application life.

APPLICATION INSTRUCTIONS

CS 3201, Class A may be applied with a brush. CS 3201, Class B may be applied with a pressure gun or a spatula. Specified application lives are based on the standard conditions of 77 deg. F and 50% relative humidity. Higher humidity will reduce the application life. Lower temperatures or lower humidity will extend the application life. For every 10 deg. F rise the application is reduced by one half, for every 10 deg. F drop, it is doubled.

CURE

The cure period is dependent on the application life, temperature, and relative humidity. Increased temperature and increased relative humidity will speed cure. Reduced temperature and reduced relative humidity will slow cure. Cure may be accelerated by heating up to 120 deg. F. Material should be firm rubber in 3 hours.

Downloads

download icon Safety Data Sheet

Product Attributes

Approvals and Conformities

SAE Spec#
AMS-S-7124 Rev. B (no QPL)

Product Attributes

Country of Origin
United States
Size
6 oz
Shipping Weight
0.45 pounds
ECCN
EAR99
Color Family
Tan
Manufacturer P/N
CS-3201 Class A-1/2 Tan
Schedule B Code
3506.91.0000
Pack Quantity
1
Size
6 oz (3.5 fl oz) Cartridge Kit
Spec
AMS-S-7124B (no QPL)
Class
A-1/2
Color
Tan
Flamemaster CS-3201 A-1/2 Tan AMS-S-7124B (no QPL) Spec Integral Fuel Tank and Cabin Sealant - 6 oz (3.5 fl oz) Kit

Features

  Class A Class B
Color
Base Compound White or Black White
Curing Agent Brown Brown
Mixed Tan or Black Tan
Non Volatile Content 90% 98%
Viscosity: Base Compound (Brookfield
Spindle #5 @ 10 RPM) 200 Poises
(Brookfield Spindle #7 @ 2 RPM) 11,000 Poises
Mixing Ratio 100:7.5 100:10
Vertical Flow 0.15 inches
Hours Application Life Tack Free Time Hours Cure to 30 REX Hours
  Class A Class B Class A Class B
1/4 6 3 24 24
½ 9 6 30 30
2 24 24 44 48
4 30 30 60

72

SURFACE PREPARATION

To obtain good adhesion, remove all traces of oil, wax, grease, dirt, or other contamination. This is done by wiping with a clean oil free solvent. Clean only small areas at one time and wipe dry with a clean cloth before the solvent evaporates. Maintain a clean solvent supply.

MIXING INSTRUCTIONS

When mixing pre-packaged kits the entire contents of base compound (Part A) and curing agent (Part B) should be used. For small quantities mix by weight to ratio indicated in Fig. 1 Applications Properties. The lip of Part A container should be removed to facilitate mixing. Next stir Part B in its original container until it is homogeneous. Add Part B to Part A and mix thoroughly for seven to ten minutes or until uniform in color. Scrape sides and bottom of the container to assure a complete mix. CS 3201 may be mixed by hand or with a mechanical mixer. When using a mechanical mixer, use low speeds since high speeds will generate internal heat and reduce application life.

APPLICATION INSTRUCTIONS

CS 3201, Class A may be applied with a brush. CS 3201, Class B may be applied with a pressure gun or a spatula. Specified application lives are based on the standard conditions of 77 deg. F and 50% relative humidity. Higher humidity will reduce the application life. Lower temperatures or lower humidity will extend the application life. For every 10 deg. F rise the application is reduced by one half, for every 10 deg. F drop, it is doubled.

CURE

The cure period is dependent on the application life, temperature, and relative humidity. Increased temperature and increased relative humidity will speed cure. Reduced temperature and reduced relative humidity will slow cure. Cure may be accelerated by heating up to 120 deg. F. Material should be firm rubber in 3 hours.

Downloads

download icon Safety Data Sheet

Description

Approvals and Conformities

SAE Spec#
AMS-S-7124 Rev. B (no QPL)

Product Attributes

Country of Origin
United States
Size
6 oz
Shipping Weight
0.45 pounds
ECCN
EAR99
Color Family
Tan
Manufacturer P/N
CS-3201 Class A-1/2 Tan
Schedule B Code
3506.91.0000
Pack Quantity
1
Size
6 oz (3.5 fl oz) Cartridge Kit
Spec
AMS-S-7124B (no QPL)
Class
A-1/2
Color
Tan
Flamemaster CS-3201 A-1/2 Tan AMS-S-7124B (no QPL) Spec Integral Fuel Tank and Cabin Sealant - 6 oz (3.5 fl oz) Kit

Features

  Class A Class B
Color
Base Compound White or Black White
Curing Agent Brown Brown
Mixed Tan or Black Tan
Non Volatile Content 90% 98%
Viscosity: Base Compound (Brookfield
Spindle #5 @ 10 RPM) 200 Poises
(Brookfield Spindle #7 @ 2 RPM) 11,000 Poises
Mixing Ratio 100:7.5 100:10
Vertical Flow 0.15 inches
Hours Application Life Tack Free Time Hours Cure to 30 REX Hours
  Class A Class B Class A Class B
1/4 6 3 24 24
½ 9 6 30 30
2 24 24 44 48
4 30 30 60

72

SURFACE PREPARATION

To obtain good adhesion, remove all traces of oil, wax, grease, dirt, or other contamination. This is done by wiping with a clean oil free solvent. Clean only small areas at one time and wipe dry with a clean cloth before the solvent evaporates. Maintain a clean solvent supply.

MIXING INSTRUCTIONS

When mixing pre-packaged kits the entire contents of base compound (Part A) and curing agent (Part B) should be used. For small quantities mix by weight to ratio indicated in Fig. 1 Applications Properties. The lip of Part A container should be removed to facilitate mixing. Next stir Part B in its original container until it is homogeneous. Add Part B to Part A and mix thoroughly for seven to ten minutes or until uniform in color. Scrape sides and bottom of the container to assure a complete mix. CS 3201 may be mixed by hand or with a mechanical mixer. When using a mechanical mixer, use low speeds since high speeds will generate internal heat and reduce application life.

APPLICATION INSTRUCTIONS

CS 3201, Class A may be applied with a brush. CS 3201, Class B may be applied with a pressure gun or a spatula. Specified application lives are based on the standard conditions of 77 deg. F and 50% relative humidity. Higher humidity will reduce the application life. Lower temperatures or lower humidity will extend the application life. For every 10 deg. F rise the application is reduced by one half, for every 10 deg. F drop, it is doubled.

CURE

The cure period is dependent on the application life, temperature, and relative humidity. Increased temperature and increased relative humidity will speed cure. Reduced temperature and reduced relative humidity will slow cure. Cure may be accelerated by heating up to 120 deg. F. Material should be firm rubber in 3 hours.

Downloads

download icon Safety Data Sheet