Sherwin-Williams® CM08181HR Universal Touch-Up Accelerator - Quart

Weight Per Gallon: 8.9 lbs.
Sp. Gravity: 1.068
VOC: 0.0 lb/gal. (0 g/L)
Mixing Instructions

For Jet Glo® Express:
Touch-up Accelerator CM08181HR, should be used for stripes, touch up parts or small panel areas only.

1. Admix product according to Jet Glo® Express mixing instructions.
2. Add 8181HR up to the following levels:

   Admixed Gallon: 4 ounce
   Admixed Quart: 1 ounce

For Acry Glo® High Solids:

1. Admix product according to Acry Glo® High Solids mixing instructions.
2. Add CM08181HR up to the following levels:

   Admixed Gallon: 1 ounce
   Admixed Quart: 1/4 ounce

Drying Schedule

Dry times are based on the dry film thickness of 2-3 mils (50-75 microns) and mixed according to the mixing instructions identified above.

For Jet Glo® Express
Air Dry Times (75°F / 25°C and 50% RH)
To Tape: 2-4 Hours

Recoat Time: 12 Hours maximum

Acry Glo® High Solids:

Air Dry Times (75°F / 25°C and 50% RH)
To Tape: 2-3 Hours

Recoat Time: 12 Hours maximum

NOTE: Lower temperatures, heavy film thickness, improper activator range selection and poor air movement will extend the dry time.

Equipment Cleanup

Use clean Ketone–type solvents such as CM0110308 MEK. Do not allow material to cure inside equipment.

Shelf Life

3 year shelf life is applicable only for materials stored in unopened and undamaged original factory filled containers.

Minimum Storage Temp. 40ºF / 4ºC
Maximum Storage Temp. 90ºF/ 32ºC

Downloads

 Safety Data Sheet