LORD's 201 is an acrylic adhesive that is compatible with the brand's Accelerator 4, 17 or 19. Accelerator 4 is a no-mix accelerator applied to the substrate before this item, while Accelerators 17 and 19 must be mixed into 201 prior to application. When cured together, an adhesive system is created that will bond a variety of (un)prepared metals and plastics. In addition, when combined with the aforesaid accelerators, this adhesive can replace welding, brazing, riveting as well as other mechanical fastening methods. For safety purposes, read this item's MSDS. For more information, see below.
Applications: Bare metals, plastics and composites. Working Time: 5-8 minutes Handling Time: Fast, 12-16 minutes Full Strength: 2 Hours Heat cure typically not recommended Viscosity: Easy to dispense, Self-Leveling Comments: Minimal surface preparation, fast cure, good environmental resistance.
Country of Origin
Schedule B Code
7 x 3 x 1 inches
Versatile - bonds a wide variety of substrates such as metals, ceramics and plastics; insensitive to minor deviations from correct mix ratio. Bonds Unprepared Metals - requires little or no substrate preparation. Self-Leveling - flows into hard-to-reach places and is excellent for bonding irregular shapes. Environmentally Resistant - resists dilute acids, alkalis, solvents, greases, oils and moisture; provides excellent resistance to UV exposure, salt spray and weathering. Temperature Resistant - performs at temperatures from -40 to 300°F (-40 to 149°C).