Rust and corrosion can really wreck your aircraft, but with LPS® 00316 LPS® 3 Long-Term Rust Inhibitor from SkyGeek, you won't have to worry about rust for up to 2 years after application. The spray-on formula goes on quickly, covering every inch of your aircraft's sensitive surfaces with premium rust protection. The non-sling formula won't attract dust, dirt or debris and once cured, LPS® 00316 LPS® 3 Long-Term Rust Prevention Spray forms a self-healing, soft, waxy film on the surface of your aircraft for more reliable protection. Is moisture already causing trouble? LPS® 00316 LPS® 3 Long-Term Rust Inhibitor penetrates deeply, displacing moisture and delivering reliable protection.
LPS® 3 LPS Rust Inhibitor from SkyGeek is safe to use on all metals, including aluminum. In fact, when used on aluminum, LPS® 00316 LPS® 3 Long-Term Rust Inhibitor Spray even prevents exfoliation and filiform corrosion. The spray-on corrosion inhibitor dries to handling in just 6 to 8 hours with a full cure in only 24 hours. Spray your way to reliable rust prevention by ordering a can of LPS® 00316 LPS® 3 Long-Term Aerosol Rust Inhibitor from SkyGeek.
Forms a transparent, soft, waxy film for protection and lubrication Inhibits rust and corrosion; protects steel parts indoors for up to 2 years Inhibits exfoliation and filiform corrosion of aluminum Penetrates to displace moisture Does not contain chlorinated solvents or silicone Nonconductive Safe on most surfaces Meets NSF requirements for H2 Registration: #129027 (aerosol), #059849 (bulk) Accepted by the Canadian Food Inspection Agency - Category n1 Inverta Spray Valve
Meets or Exceeds these Airframe Specifications Boeing BMS 3-23 G Type II DMS 2150 Lockheed G39.2004 Mil-PRF-16173D Grade 2 Class 1 Airbus TN A.007.10138 Type 1 Grade 2 NSF Registered Category Code H2 Registration No.: # 129027 Canadian Food Inspection Agency (CFIA) approved
Appearance/Physical State: Opaque brown liquid Dielectric Strength (ASTM D-877): 19.5 kv Flash Point (TCC): 100°F(40°C) minimum HMIS: 1,2,0 Humidity Cabinet Test(ASTM D 1748):: No rust on 1029 steel panels after 30 days Pour Point: 0°F(-18°C) Propellant: Carbon Dioxide Salt Spray Cabinet Test (ASTM-D-117): No corrosion on 2024-T3 aluminum panels after 1500 hours Specifc Gravity(water=1): 0.82–0.86 Typical Dried Film Thickness:: 50-100 microns(2-4 mils) Viscosity at 25°C: 200-600 cps
Safety Data Sheet