Henkel 419546 LOCTITE® EA 934NA™ AERO Gray High-Temperature Epoxy Adhesive - Pint Kit

Our Part #: SGP93313
Manufacture Part #: 419546
Our Price: $154.68
Price Per Each

Bulk Shop & Save

  • 12 - 23 $152.24 ea.
  • 24 - 35 $149.88 ea.
  • 36 - 47 $147.59 ea.
  • 48 + $145.37 ea.
Hazmat Order iconHAZMAT ORDERS
Safety Data Sheet download icon

SkyGeek Shelf-Life Policy

Warning: This product may contain a chemical known by the State of California to cause health issues. Details found here www.p65warnings.ca.gov

UN Number: UN2735

UN Class: 8

World wide icon INTERNATIONAL SHIPPING

SkyGeek welcomes international orders!

Please note: such orders are funneled into our NY warehouse and may take an extra 7-10 days to process. The benefit to this: You get one package shipped which reduces added taxes and duties that may be incurred from multiple shipments.

Approvals and Conformities

Approvals and Conformities

Alternate PN#s
EA934NA, AS9174015

Product Attributes

Country of Origin
United States
Size
Pint
Shipping Weight
3 pounds
ECCN
EAR99
Color Family
Gray
Manufacturer P/N
EA 934NA
Schedule B Code
3907.30.0000
Pack Quantity
1
Ship Dimensions
7 x 4 x 4 inches
Size
Pint Kit
Color
Gray
Hysol® EA 934NA™ cures at 25ºC / 77ºF, possesses superior strength of 149ºC / 300ºF. Ideal for potting, filling, fairing and shim applications.

Mixing - This product requires mixing two components together just prior to application to the parts to be bonded. Complete mixing is necessary. The temperature of the separate components prior to mixing is not critical, but should be close to room temperature (77°F/25°C).

Mix Ratio By Weight: Part A - 100 / Part B - 33

Pot Life (450 g mass) 40 minutes @ 77°F/25°C Method - ASTM D2471 in water bath.

Application

Mixing - Combine Part A and Part B in the correct ratio and mix thoroughly. THIS IS IMPORTANT! Heat buildup during or after mixing is normal. Do not mix quantities greater than 1 pound as dangerous heat buildup can occur causing uncontrolled decomposition of the mixed adhesive. TOXIC FUMES CAN OCCUR, RESULTING IN PERSONAL INJURY. Mixing smaller quantities will minimize the heat buildup.

Applying - Bonding surfaces should be clean, dry and properly prepared. For optimum surface preparation consult the Hysol Surface Preparation Guide. The bonded parts should be held in contact until the adhesive is set. Handling strength for this adhesive will occur in 8 hours @ 77°F/25°C, after which the support tooling or pressure used during cure may be removed. (Alternates are: 20 minutes @ 140°F/60°C, or 1 minute @ 205°F/96°C.) Since full bond strength has not yet been attained, load application should be small at this time.

Curing - This adhesive may be cured for 5 to 7 days @ 77°F/25°C to achieve normal performance. Accelerated cures up to 200°F/93°C (for small masses only) may be used as an alternative. For example, 1 hour @ 200°F/93°C will give complete cure.

Cleanup - It is important to remove excess adhesive from the work area and application equipment before it hardens. Denatured alcohol and many common industrial solvents are suitable for removing uncured adhesive. Consult your supplier's information pertaining to the safe and proper use of solvents.

Features

  • Room Temperature Cure
  • Good Gap Filler
  • 300°F/149°C Performance
  • Potting Material
  • MMM-A-132 Qualified
  • Develops Strength Rapidly
Part A Part B Mixed
Color Gray Amber Gray
Viscosity @ 77°F 3500–9000 Poise 10 - 30 Poise 800 Poise
Brookfield, HBT Spdl 7 @ 20 rpm Spdl 1 @ 20 rpm Spdl 6 @ 20 rpm
Viscosity @ 25°C 350 - 900 Pa·S 1 - 3 Pa·S 80 Pa·S
Brookfield, HBT Spdl 7 @ 2.1 rad/s Spdl 1 @ 2.1 rad/s Spdl 6 @ 2.1 rad/s
Density (g/ml) 1.5 0.96 1.36
Shelf life
@ 0°F/-18°C 1 year 1 year
@ <40°F/4°C 1 year 1 year
@ <77°F/25°C 3 months 1 year
@ <90°F/32°C 2 months 1 year

Downloads

download icon Safety Data Sheet

Product Attributes

Approvals and Conformities

Alternate PN#s
EA934NA, AS9174015

Product Attributes

Country of Origin
United States
Size
Pint
Shipping Weight
3 pounds
ECCN
EAR99
Color Family
Gray
Manufacturer P/N
EA 934NA
Schedule B Code
3907.30.0000
Pack Quantity
1
Ship Dimensions
7 x 4 x 4 inches
Size
Pint Kit
Color
Gray
Hysol® EA 934NA™ cures at 25ºC / 77ºF, possesses superior strength of 149ºC / 300ºF. Ideal for potting, filling, fairing and shim applications.

Mixing - This product requires mixing two components together just prior to application to the parts to be bonded. Complete mixing is necessary. The temperature of the separate components prior to mixing is not critical, but should be close to room temperature (77°F/25°C).

Mix Ratio By Weight: Part A - 100 / Part B - 33

Pot Life (450 g mass) 40 minutes @ 77°F/25°C Method - ASTM D2471 in water bath.

Application

Mixing - Combine Part A and Part B in the correct ratio and mix thoroughly. THIS IS IMPORTANT! Heat buildup during or after mixing is normal. Do not mix quantities greater than 1 pound as dangerous heat buildup can occur causing uncontrolled decomposition of the mixed adhesive. TOXIC FUMES CAN OCCUR, RESULTING IN PERSONAL INJURY. Mixing smaller quantities will minimize the heat buildup.

Applying - Bonding surfaces should be clean, dry and properly prepared. For optimum surface preparation consult the Hysol Surface Preparation Guide. The bonded parts should be held in contact until the adhesive is set. Handling strength for this adhesive will occur in 8 hours @ 77°F/25°C, after which the support tooling or pressure used during cure may be removed. (Alternates are: 20 minutes @ 140°F/60°C, or 1 minute @ 205°F/96°C.) Since full bond strength has not yet been attained, load application should be small at this time.

Curing - This adhesive may be cured for 5 to 7 days @ 77°F/25°C to achieve normal performance. Accelerated cures up to 200°F/93°C (for small masses only) may be used as an alternative. For example, 1 hour @ 200°F/93°C will give complete cure.

Cleanup - It is important to remove excess adhesive from the work area and application equipment before it hardens. Denatured alcohol and many common industrial solvents are suitable for removing uncured adhesive. Consult your supplier's information pertaining to the safe and proper use of solvents.

Features

  • Room Temperature Cure
  • Good Gap Filler
  • 300°F/149°C Performance
  • Potting Material
  • MMM-A-132 Qualified
  • Develops Strength Rapidly
Part A Part B Mixed
Color Gray Amber Gray
Viscosity @ 77°F 3500–9000 Poise 10 - 30 Poise 800 Poise
Brookfield, HBT Spdl 7 @ 20 rpm Spdl 1 @ 20 rpm Spdl 6 @ 20 rpm
Viscosity @ 25°C 350 - 900 Pa·S 1 - 3 Pa·S 80 Pa·S
Brookfield, HBT Spdl 7 @ 2.1 rad/s Spdl 1 @ 2.1 rad/s Spdl 6 @ 2.1 rad/s
Density (g/ml) 1.5 0.96 1.36
Shelf life
@ 0°F/-18°C 1 year 1 year
@ <40°F/4°C 1 year 1 year
@ <77°F/25°C 3 months 1 year
@ <90°F/32°C 2 months 1 year

Downloads

download icon Safety Data Sheet

Description

Approvals and Conformities

Alternate PN#s
EA934NA, AS9174015

Product Attributes

Country of Origin
United States
Size
Pint
Shipping Weight
3 pounds
ECCN
EAR99
Color Family
Gray
Manufacturer P/N
EA 934NA
Schedule B Code
3907.30.0000
Pack Quantity
1
Ship Dimensions
7 x 4 x 4 inches
Size
Pint Kit
Color
Gray
Hysol® EA 934NA™ cures at 25ºC / 77ºF, possesses superior strength of 149ºC / 300ºF. Ideal for potting, filling, fairing and shim applications.

Mixing - This product requires mixing two components together just prior to application to the parts to be bonded. Complete mixing is necessary. The temperature of the separate components prior to mixing is not critical, but should be close to room temperature (77°F/25°C).

Mix Ratio By Weight: Part A - 100 / Part B - 33

Pot Life (450 g mass) 40 minutes @ 77°F/25°C Method - ASTM D2471 in water bath.

Application

Mixing - Combine Part A and Part B in the correct ratio and mix thoroughly. THIS IS IMPORTANT! Heat buildup during or after mixing is normal. Do not mix quantities greater than 1 pound as dangerous heat buildup can occur causing uncontrolled decomposition of the mixed adhesive. TOXIC FUMES CAN OCCUR, RESULTING IN PERSONAL INJURY. Mixing smaller quantities will minimize the heat buildup.

Applying - Bonding surfaces should be clean, dry and properly prepared. For optimum surface preparation consult the Hysol Surface Preparation Guide. The bonded parts should be held in contact until the adhesive is set. Handling strength for this adhesive will occur in 8 hours @ 77°F/25°C, after which the support tooling or pressure used during cure may be removed. (Alternates are: 20 minutes @ 140°F/60°C, or 1 minute @ 205°F/96°C.) Since full bond strength has not yet been attained, load application should be small at this time.

Curing - This adhesive may be cured for 5 to 7 days @ 77°F/25°C to achieve normal performance. Accelerated cures up to 200°F/93°C (for small masses only) may be used as an alternative. For example, 1 hour @ 200°F/93°C will give complete cure.

Cleanup - It is important to remove excess adhesive from the work area and application equipment before it hardens. Denatured alcohol and many common industrial solvents are suitable for removing uncured adhesive. Consult your supplier's information pertaining to the safe and proper use of solvents.

Features

  • Room Temperature Cure
  • Good Gap Filler
  • 300°F/149°C Performance
  • Potting Material
  • MMM-A-132 Qualified
  • Develops Strength Rapidly
Part A Part B Mixed
Color Gray Amber Gray
Viscosity @ 77°F 3500–9000 Poise 10 - 30 Poise 800 Poise
Brookfield, HBT Spdl 7 @ 20 rpm Spdl 1 @ 20 rpm Spdl 6 @ 20 rpm
Viscosity @ 25°C 350 - 900 Pa·S 1 - 3 Pa·S 80 Pa·S
Brookfield, HBT Spdl 7 @ 2.1 rad/s Spdl 1 @ 2.1 rad/s Spdl 6 @ 2.1 rad/s
Density (g/ml) 1.5 0.96 1.36
Shelf life
@ 0°F/-18°C 1 year 1 year
@ <40°F/4°C 1 year 1 year
@ <77°F/25°C 3 months 1 year
@ <90°F/32°C 2 months 1 year

Downloads

download icon Safety Data Sheet

Approvals and Conformities

Approvals and Conformities

Alternate PN#s
EA934NA, AS9174015

Product Attributes

Country of Origin
United States
Size
Pint
Shipping Weight
3 pounds
ECCN
EAR99
Color Family
Gray
Manufacturer P/N
EA 934NA
Schedule B Code
3907.30.0000
Pack Quantity
1
Ship Dimensions
7 x 4 x 4 inches
Size
Pint Kit
Color
Gray
Hysol® EA 934NA™ cures at 25ºC / 77ºF, possesses superior strength of 149ºC / 300ºF. Ideal for potting, filling, fairing and shim applications.

Mixing - This product requires mixing two components together just prior to application to the parts to be bonded. Complete mixing is necessary. The temperature of the separate components prior to mixing is not critical, but should be close to room temperature (77°F/25°C).

Mix Ratio By Weight: Part A - 100 / Part B - 33

Pot Life (450 g mass) 40 minutes @ 77°F/25°C Method - ASTM D2471 in water bath.

Application

Mixing - Combine Part A and Part B in the correct ratio and mix thoroughly. THIS IS IMPORTANT! Heat buildup during or after mixing is normal. Do not mix quantities greater than 1 pound as dangerous heat buildup can occur causing uncontrolled decomposition of the mixed adhesive. TOXIC FUMES CAN OCCUR, RESULTING IN PERSONAL INJURY. Mixing smaller quantities will minimize the heat buildup.

Applying - Bonding surfaces should be clean, dry and properly prepared. For optimum surface preparation consult the Hysol Surface Preparation Guide. The bonded parts should be held in contact until the adhesive is set. Handling strength for this adhesive will occur in 8 hours @ 77°F/25°C, after which the support tooling or pressure used during cure may be removed. (Alternates are: 20 minutes @ 140°F/60°C, or 1 minute @ 205°F/96°C.) Since full bond strength has not yet been attained, load application should be small at this time.

Curing - This adhesive may be cured for 5 to 7 days @ 77°F/25°C to achieve normal performance. Accelerated cures up to 200°F/93°C (for small masses only) may be used as an alternative. For example, 1 hour @ 200°F/93°C will give complete cure.

Cleanup - It is important to remove excess adhesive from the work area and application equipment before it hardens. Denatured alcohol and many common industrial solvents are suitable for removing uncured adhesive. Consult your supplier's information pertaining to the safe and proper use of solvents.

Features

  • Room Temperature Cure
  • Good Gap Filler
  • 300°F/149°C Performance
  • Potting Material
  • MMM-A-132 Qualified
  • Develops Strength Rapidly
Part A Part B Mixed
Color Gray Amber Gray
Viscosity @ 77°F 3500–9000 Poise 10 - 30 Poise 800 Poise
Brookfield, HBT Spdl 7 @ 20 rpm Spdl 1 @ 20 rpm Spdl 6 @ 20 rpm
Viscosity @ 25°C 350 - 900 Pa·S 1 - 3 Pa·S 80 Pa·S
Brookfield, HBT Spdl 7 @ 2.1 rad/s Spdl 1 @ 2.1 rad/s Spdl 6 @ 2.1 rad/s
Density (g/ml) 1.5 0.96 1.36
Shelf life
@ 0°F/-18°C 1 year 1 year
@ <40°F/4°C 1 year 1 year
@ <77°F/25°C 3 months 1 year
@ <90°F/32°C 2 months 1 year

Downloads

download icon Safety Data Sheet

Product Attributes

Approvals and Conformities

Alternate PN#s
EA934NA, AS9174015

Product Attributes

Country of Origin
United States
Size
Pint
Shipping Weight
3 pounds
ECCN
EAR99
Color Family
Gray
Manufacturer P/N
EA 934NA
Schedule B Code
3907.30.0000
Pack Quantity
1
Ship Dimensions
7 x 4 x 4 inches
Size
Pint Kit
Color
Gray
Hysol® EA 934NA™ cures at 25ºC / 77ºF, possesses superior strength of 149ºC / 300ºF. Ideal for potting, filling, fairing and shim applications.

Mixing - This product requires mixing two components together just prior to application to the parts to be bonded. Complete mixing is necessary. The temperature of the separate components prior to mixing is not critical, but should be close to room temperature (77°F/25°C).

Mix Ratio By Weight: Part A - 100 / Part B - 33

Pot Life (450 g mass) 40 minutes @ 77°F/25°C Method - ASTM D2471 in water bath.

Application

Mixing - Combine Part A and Part B in the correct ratio and mix thoroughly. THIS IS IMPORTANT! Heat buildup during or after mixing is normal. Do not mix quantities greater than 1 pound as dangerous heat buildup can occur causing uncontrolled decomposition of the mixed adhesive. TOXIC FUMES CAN OCCUR, RESULTING IN PERSONAL INJURY. Mixing smaller quantities will minimize the heat buildup.

Applying - Bonding surfaces should be clean, dry and properly prepared. For optimum surface preparation consult the Hysol Surface Preparation Guide. The bonded parts should be held in contact until the adhesive is set. Handling strength for this adhesive will occur in 8 hours @ 77°F/25°C, after which the support tooling or pressure used during cure may be removed. (Alternates are: 20 minutes @ 140°F/60°C, or 1 minute @ 205°F/96°C.) Since full bond strength has not yet been attained, load application should be small at this time.

Curing - This adhesive may be cured for 5 to 7 days @ 77°F/25°C to achieve normal performance. Accelerated cures up to 200°F/93°C (for small masses only) may be used as an alternative. For example, 1 hour @ 200°F/93°C will give complete cure.

Cleanup - It is important to remove excess adhesive from the work area and application equipment before it hardens. Denatured alcohol and many common industrial solvents are suitable for removing uncured adhesive. Consult your supplier's information pertaining to the safe and proper use of solvents.

Features

  • Room Temperature Cure
  • Good Gap Filler
  • 300°F/149°C Performance
  • Potting Material
  • MMM-A-132 Qualified
  • Develops Strength Rapidly
Part A Part B Mixed
Color Gray Amber Gray
Viscosity @ 77°F 3500–9000 Poise 10 - 30 Poise 800 Poise
Brookfield, HBT Spdl 7 @ 20 rpm Spdl 1 @ 20 rpm Spdl 6 @ 20 rpm
Viscosity @ 25°C 350 - 900 Pa·S 1 - 3 Pa·S 80 Pa·S
Brookfield, HBT Spdl 7 @ 2.1 rad/s Spdl 1 @ 2.1 rad/s Spdl 6 @ 2.1 rad/s
Density (g/ml) 1.5 0.96 1.36
Shelf life
@ 0°F/-18°C 1 year 1 year
@ <40°F/4°C 1 year 1 year
@ <77°F/25°C 3 months 1 year
@ <90°F/32°C 2 months 1 year

Downloads

download icon Safety Data Sheet

Description

Approvals and Conformities

Alternate PN#s
EA934NA, AS9174015

Product Attributes

Country of Origin
United States
Size
Pint
Shipping Weight
3 pounds
ECCN
EAR99
Color Family
Gray
Manufacturer P/N
EA 934NA
Schedule B Code
3907.30.0000
Pack Quantity
1
Ship Dimensions
7 x 4 x 4 inches
Size
Pint Kit
Color
Gray
Hysol® EA 934NA™ cures at 25ºC / 77ºF, possesses superior strength of 149ºC / 300ºF. Ideal for potting, filling, fairing and shim applications.

Mixing - This product requires mixing two components together just prior to application to the parts to be bonded. Complete mixing is necessary. The temperature of the separate components prior to mixing is not critical, but should be close to room temperature (77°F/25°C).

Mix Ratio By Weight: Part A - 100 / Part B - 33

Pot Life (450 g mass) 40 minutes @ 77°F/25°C Method - ASTM D2471 in water bath.

Application

Mixing - Combine Part A and Part B in the correct ratio and mix thoroughly. THIS IS IMPORTANT! Heat buildup during or after mixing is normal. Do not mix quantities greater than 1 pound as dangerous heat buildup can occur causing uncontrolled decomposition of the mixed adhesive. TOXIC FUMES CAN OCCUR, RESULTING IN PERSONAL INJURY. Mixing smaller quantities will minimize the heat buildup.

Applying - Bonding surfaces should be clean, dry and properly prepared. For optimum surface preparation consult the Hysol Surface Preparation Guide. The bonded parts should be held in contact until the adhesive is set. Handling strength for this adhesive will occur in 8 hours @ 77°F/25°C, after which the support tooling or pressure used during cure may be removed. (Alternates are: 20 minutes @ 140°F/60°C, or 1 minute @ 205°F/96°C.) Since full bond strength has not yet been attained, load application should be small at this time.

Curing - This adhesive may be cured for 5 to 7 days @ 77°F/25°C to achieve normal performance. Accelerated cures up to 200°F/93°C (for small masses only) may be used as an alternative. For example, 1 hour @ 200°F/93°C will give complete cure.

Cleanup - It is important to remove excess adhesive from the work area and application equipment before it hardens. Denatured alcohol and many common industrial solvents are suitable for removing uncured adhesive. Consult your supplier's information pertaining to the safe and proper use of solvents.

Features

  • Room Temperature Cure
  • Good Gap Filler
  • 300°F/149°C Performance
  • Potting Material
  • MMM-A-132 Qualified
  • Develops Strength Rapidly
Part A Part B Mixed
Color Gray Amber Gray
Viscosity @ 77°F 3500–9000 Poise 10 - 30 Poise 800 Poise
Brookfield, HBT Spdl 7 @ 20 rpm Spdl 1 @ 20 rpm Spdl 6 @ 20 rpm
Viscosity @ 25°C 350 - 900 Pa·S 1 - 3 Pa·S 80 Pa·S
Brookfield, HBT Spdl 7 @ 2.1 rad/s Spdl 1 @ 2.1 rad/s Spdl 6 @ 2.1 rad/s
Density (g/ml) 1.5 0.96 1.36
Shelf life
@ 0°F/-18°C 1 year 1 year
@ <40°F/4°C 1 year 1 year
@ <77°F/25°C 3 months 1 year
@ <90°F/32°C 2 months 1 year

Downloads

download icon Safety Data Sheet