SOCOPAC® 50S Brown-Red Hydrophobic Penetrating Corrosion Inhibiting Compound - 500 mL Aerosol Can

Our Part #: SGP207698
Manufacture Part #: P19190-500ML-A-3
Our Price: $47.81 (Each)

Bulk Shop & Save

  • 12 - 23 $47.16 (Each)
  • 24 - 35 $46.52 (Each)
  • 36 - 47 $45.90 (Each)
  • 48 + $45.29 (Each)
Hazmat Order iconHAZMAT ORDERS
Safety Data Sheet download icon

SkyGeek Shelf-Life Policy

Warning: This product may contain a chemical known by the State of California to cause health issues. Details found here www.p65warnings.ca.gov

UN Number: UN1950

UN Class: 2.1

World wide icon INTERNATIONAL SHIPPING

SkyGeek welcomes international orders!

Please note: such orders are funneled into our NY warehouse and may take an extra 7-10 days to process. The benefit to this: You get one package shipped which reduces added taxes and duties that may be incurred from multiple shipments.

Approvals and Conformities

Approvals and Conformities

Airbus PN/Spec#
Conforms IPS 09-08-002-02 Type II
Dassault PN/Spec#
Conforms DGQT 1.7.0103 Type III
Alternate PN#s
DMR 75-610, CCT 00706, DTRF 150 611

Product Attributes

Country of Origin
United States
Size
500 mL
Shipping Weight
1.5 pounds
ECCN
EAR99
Color Family
Brown
Manufacturer P/N
SOCOPAC 50S
Schedule B Code
3403.19.0000
Pack Quantity
1
Size
500 mL Aerosol Can
Color
Brown
Aircraft corrosion inhibitor that gives long lasting corrosion protection to commercial and military aircraft materials, spare parts and assemblies in unfavorable climatic conditions.
The film obtained forms a very efficient barrier against all causes of corrosion (water, oxygen, acids, basis and salts from industrial emissions, tropical atmospheres, etc.).
Its long-lasting corrosion preventive power allows a complete conservation guarantee after application on various materials such as aluminum and alloys, steels, light metals (titanium, magnesium), zinc and galvanized steel, copper and its alloys, cadmium. It can be applied without any risk of attack on painted surfaces, composite materials, plastics, rubbers, plexiglas and polycarbonates (non crazing).
SOCOPAC 50S has been formulated to offer the highest safety to the users as well as to the pieces to be protected; it is absolutely free of harmful solvents, toluene, xylene or chlorinated compounds.
  • After drying SOCOPAC 50S leaves an impervious durable protective film, resistant to temperature differentials, heavy rain, sea air, tropical atmospheres or corrosive industrial atmospheres.
  • This film is medium hard, but wax-like and dry to the touch. Thanks to its flexibility, it can absorb slight impacts without damage or crazing. If the scratch is deeper, the capillary activity and polarity properties of the film towards the treated surface prevent the scratch from spreading. This facility of the protection called «self-healing» allows handling of the pieces even after a prolonged storage time, without loss of the protective value of the SOCOPAC 50S film.
  • The dry film is intended to resist several years outside and above all to remain stable during this period. It does not suffer air-damage, by exposure to sun or to heat; it is not subjected to any cross linking or polymerisation and can be therefore removed several years after application as easily as the first day.
  • Though it has a particularly pronounced hydrophobic quality, SOCOPAC 50S was not designed for the role of a specifically hydrophobic compound. However its capillary properties allow it to protect and repel water in an efficient way any material normally exposed to open air. In cases of humid, enclosed conditions, materials and parts exposed to wide differences in temperature, before protection it is necessary to apply a water-repellent compound such as WADIS 24, or SOCOPAC 25H where a total thickness greater than 50 microns is required, before the SOCOPAC 50S coating.
  • Downloads

    download icon Safety Data Sheet

    Product Attributes

    Approvals and Conformities

    Airbus PN/Spec#
    Conforms IPS 09-08-002-02 Type II
    Dassault PN/Spec#
    Conforms DGQT 1.7.0103 Type III
    Alternate PN#s
    DMR 75-610, CCT 00706, DTRF 150 611

    Product Attributes

    Country of Origin
    United States
    Size
    500 mL
    Shipping Weight
    1.5 pounds
    ECCN
    EAR99
    Color Family
    Brown
    Manufacturer P/N
    SOCOPAC 50S
    Schedule B Code
    3403.19.0000
    Pack Quantity
    1
    Size
    500 mL Aerosol Can
    Color
    Brown
    Aircraft corrosion inhibitor that gives long lasting corrosion protection to commercial and military aircraft materials, spare parts and assemblies in unfavorable climatic conditions.
    The film obtained forms a very efficient barrier against all causes of corrosion (water, oxygen, acids, basis and salts from industrial emissions, tropical atmospheres, etc.).
    Its long-lasting corrosion preventive power allows a complete conservation guarantee after application on various materials such as aluminum and alloys, steels, light metals (titanium, magnesium), zinc and galvanized steel, copper and its alloys, cadmium. It can be applied without any risk of attack on painted surfaces, composite materials, plastics, rubbers, plexiglas and polycarbonates (non crazing).
    SOCOPAC 50S has been formulated to offer the highest safety to the users as well as to the pieces to be protected; it is absolutely free of harmful solvents, toluene, xylene or chlorinated compounds.
  • After drying SOCOPAC 50S leaves an impervious durable protective film, resistant to temperature differentials, heavy rain, sea air, tropical atmospheres or corrosive industrial atmospheres.
  • This film is medium hard, but wax-like and dry to the touch. Thanks to its flexibility, it can absorb slight impacts without damage or crazing. If the scratch is deeper, the capillary activity and polarity properties of the film towards the treated surface prevent the scratch from spreading. This facility of the protection called «self-healing» allows handling of the pieces even after a prolonged storage time, without loss of the protective value of the SOCOPAC 50S film.
  • The dry film is intended to resist several years outside and above all to remain stable during this period. It does not suffer air-damage, by exposure to sun or to heat; it is not subjected to any cross linking or polymerisation and can be therefore removed several years after application as easily as the first day.
  • Though it has a particularly pronounced hydrophobic quality, SOCOPAC 50S was not designed for the role of a specifically hydrophobic compound. However its capillary properties allow it to protect and repel water in an efficient way any material normally exposed to open air. In cases of humid, enclosed conditions, materials and parts exposed to wide differences in temperature, before protection it is necessary to apply a water-repellent compound such as WADIS 24, or SOCOPAC 25H where a total thickness greater than 50 microns is required, before the SOCOPAC 50S coating.
  • Downloads

    download icon Safety Data Sheet

    Description

    Approvals and Conformities

    Airbus PN/Spec#
    Conforms IPS 09-08-002-02 Type II
    Dassault PN/Spec#
    Conforms DGQT 1.7.0103 Type III
    Alternate PN#s
    DMR 75-610, CCT 00706, DTRF 150 611

    Product Attributes

    Country of Origin
    United States
    Size
    500 mL
    Shipping Weight
    1.5 pounds
    ECCN
    EAR99
    Color Family
    Brown
    Manufacturer P/N
    SOCOPAC 50S
    Schedule B Code
    3403.19.0000
    Pack Quantity
    1
    Size
    500 mL Aerosol Can
    Color
    Brown
    Aircraft corrosion inhibitor that gives long lasting corrosion protection to commercial and military aircraft materials, spare parts and assemblies in unfavorable climatic conditions.
    The film obtained forms a very efficient barrier against all causes of corrosion (water, oxygen, acids, basis and salts from industrial emissions, tropical atmospheres, etc.).
    Its long-lasting corrosion preventive power allows a complete conservation guarantee after application on various materials such as aluminum and alloys, steels, light metals (titanium, magnesium), zinc and galvanized steel, copper and its alloys, cadmium. It can be applied without any risk of attack on painted surfaces, composite materials, plastics, rubbers, plexiglas and polycarbonates (non crazing).
    SOCOPAC 50S has been formulated to offer the highest safety to the users as well as to the pieces to be protected; it is absolutely free of harmful solvents, toluene, xylene or chlorinated compounds.
  • After drying SOCOPAC 50S leaves an impervious durable protective film, resistant to temperature differentials, heavy rain, sea air, tropical atmospheres or corrosive industrial atmospheres.
  • This film is medium hard, but wax-like and dry to the touch. Thanks to its flexibility, it can absorb slight impacts without damage or crazing. If the scratch is deeper, the capillary activity and polarity properties of the film towards the treated surface prevent the scratch from spreading. This facility of the protection called «self-healing» allows handling of the pieces even after a prolonged storage time, without loss of the protective value of the SOCOPAC 50S film.
  • The dry film is intended to resist several years outside and above all to remain stable during this period. It does not suffer air-damage, by exposure to sun or to heat; it is not subjected to any cross linking or polymerisation and can be therefore removed several years after application as easily as the first day.
  • Though it has a particularly pronounced hydrophobic quality, SOCOPAC 50S was not designed for the role of a specifically hydrophobic compound. However its capillary properties allow it to protect and repel water in an efficient way any material normally exposed to open air. In cases of humid, enclosed conditions, materials and parts exposed to wide differences in temperature, before protection it is necessary to apply a water-repellent compound such as WADIS 24, or SOCOPAC 25H where a total thickness greater than 50 microns is required, before the SOCOPAC 50S coating.
  • Downloads

    download icon Safety Data Sheet

    Approvals and Conformities

    Approvals and Conformities

    Airbus PN/Spec#
    Conforms IPS 09-08-002-02 Type II
    Dassault PN/Spec#
    Conforms DGQT 1.7.0103 Type III
    Alternate PN#s
    DMR 75-610, CCT 00706, DTRF 150 611

    Product Attributes

    Country of Origin
    United States
    Size
    500 mL
    Shipping Weight
    1.5 pounds
    ECCN
    EAR99
    Color Family
    Brown
    Manufacturer P/N
    SOCOPAC 50S
    Schedule B Code
    3403.19.0000
    Pack Quantity
    1
    Size
    500 mL Aerosol Can
    Color
    Brown
    Aircraft corrosion inhibitor that gives long lasting corrosion protection to commercial and military aircraft materials, spare parts and assemblies in unfavorable climatic conditions.
    The film obtained forms a very efficient barrier against all causes of corrosion (water, oxygen, acids, basis and salts from industrial emissions, tropical atmospheres, etc.).
    Its long-lasting corrosion preventive power allows a complete conservation guarantee after application on various materials such as aluminum and alloys, steels, light metals (titanium, magnesium), zinc and galvanized steel, copper and its alloys, cadmium. It can be applied without any risk of attack on painted surfaces, composite materials, plastics, rubbers, plexiglas and polycarbonates (non crazing).
    SOCOPAC 50S has been formulated to offer the highest safety to the users as well as to the pieces to be protected; it is absolutely free of harmful solvents, toluene, xylene or chlorinated compounds.
  • After drying SOCOPAC 50S leaves an impervious durable protective film, resistant to temperature differentials, heavy rain, sea air, tropical atmospheres or corrosive industrial atmospheres.
  • This film is medium hard, but wax-like and dry to the touch. Thanks to its flexibility, it can absorb slight impacts without damage or crazing. If the scratch is deeper, the capillary activity and polarity properties of the film towards the treated surface prevent the scratch from spreading. This facility of the protection called «self-healing» allows handling of the pieces even after a prolonged storage time, without loss of the protective value of the SOCOPAC 50S film.
  • The dry film is intended to resist several years outside and above all to remain stable during this period. It does not suffer air-damage, by exposure to sun or to heat; it is not subjected to any cross linking or polymerisation and can be therefore removed several years after application as easily as the first day.
  • Though it has a particularly pronounced hydrophobic quality, SOCOPAC 50S was not designed for the role of a specifically hydrophobic compound. However its capillary properties allow it to protect and repel water in an efficient way any material normally exposed to open air. In cases of humid, enclosed conditions, materials and parts exposed to wide differences in temperature, before protection it is necessary to apply a water-repellent compound such as WADIS 24, or SOCOPAC 25H where a total thickness greater than 50 microns is required, before the SOCOPAC 50S coating.
  • Downloads

    download icon Safety Data Sheet

    Product Attributes

    Approvals and Conformities

    Airbus PN/Spec#
    Conforms IPS 09-08-002-02 Type II
    Dassault PN/Spec#
    Conforms DGQT 1.7.0103 Type III
    Alternate PN#s
    DMR 75-610, CCT 00706, DTRF 150 611

    Product Attributes

    Country of Origin
    United States
    Size
    500 mL
    Shipping Weight
    1.5 pounds
    ECCN
    EAR99
    Color Family
    Brown
    Manufacturer P/N
    SOCOPAC 50S
    Schedule B Code
    3403.19.0000
    Pack Quantity
    1
    Size
    500 mL Aerosol Can
    Color
    Brown
    Aircraft corrosion inhibitor that gives long lasting corrosion protection to commercial and military aircraft materials, spare parts and assemblies in unfavorable climatic conditions.
    The film obtained forms a very efficient barrier against all causes of corrosion (water, oxygen, acids, basis and salts from industrial emissions, tropical atmospheres, etc.).
    Its long-lasting corrosion preventive power allows a complete conservation guarantee after application on various materials such as aluminum and alloys, steels, light metals (titanium, magnesium), zinc and galvanized steel, copper and its alloys, cadmium. It can be applied without any risk of attack on painted surfaces, composite materials, plastics, rubbers, plexiglas and polycarbonates (non crazing).
    SOCOPAC 50S has been formulated to offer the highest safety to the users as well as to the pieces to be protected; it is absolutely free of harmful solvents, toluene, xylene or chlorinated compounds.
  • After drying SOCOPAC 50S leaves an impervious durable protective film, resistant to temperature differentials, heavy rain, sea air, tropical atmospheres or corrosive industrial atmospheres.
  • This film is medium hard, but wax-like and dry to the touch. Thanks to its flexibility, it can absorb slight impacts without damage or crazing. If the scratch is deeper, the capillary activity and polarity properties of the film towards the treated surface prevent the scratch from spreading. This facility of the protection called «self-healing» allows handling of the pieces even after a prolonged storage time, without loss of the protective value of the SOCOPAC 50S film.
  • The dry film is intended to resist several years outside and above all to remain stable during this period. It does not suffer air-damage, by exposure to sun or to heat; it is not subjected to any cross linking or polymerisation and can be therefore removed several years after application as easily as the first day.
  • Though it has a particularly pronounced hydrophobic quality, SOCOPAC 50S was not designed for the role of a specifically hydrophobic compound. However its capillary properties allow it to protect and repel water in an efficient way any material normally exposed to open air. In cases of humid, enclosed conditions, materials and parts exposed to wide differences in temperature, before protection it is necessary to apply a water-repellent compound such as WADIS 24, or SOCOPAC 25H where a total thickness greater than 50 microns is required, before the SOCOPAC 50S coating.
  • Downloads

    download icon Safety Data Sheet

    Description

    Approvals and Conformities

    Airbus PN/Spec#
    Conforms IPS 09-08-002-02 Type II
    Dassault PN/Spec#
    Conforms DGQT 1.7.0103 Type III
    Alternate PN#s
    DMR 75-610, CCT 00706, DTRF 150 611

    Product Attributes

    Country of Origin
    United States
    Size
    500 mL
    Shipping Weight
    1.5 pounds
    ECCN
    EAR99
    Color Family
    Brown
    Manufacturer P/N
    SOCOPAC 50S
    Schedule B Code
    3403.19.0000
    Pack Quantity
    1
    Size
    500 mL Aerosol Can
    Color
    Brown
    Aircraft corrosion inhibitor that gives long lasting corrosion protection to commercial and military aircraft materials, spare parts and assemblies in unfavorable climatic conditions.
    The film obtained forms a very efficient barrier against all causes of corrosion (water, oxygen, acids, basis and salts from industrial emissions, tropical atmospheres, etc.).
    Its long-lasting corrosion preventive power allows a complete conservation guarantee after application on various materials such as aluminum and alloys, steels, light metals (titanium, magnesium), zinc and galvanized steel, copper and its alloys, cadmium. It can be applied without any risk of attack on painted surfaces, composite materials, plastics, rubbers, plexiglas and polycarbonates (non crazing).
    SOCOPAC 50S has been formulated to offer the highest safety to the users as well as to the pieces to be protected; it is absolutely free of harmful solvents, toluene, xylene or chlorinated compounds.
  • After drying SOCOPAC 50S leaves an impervious durable protective film, resistant to temperature differentials, heavy rain, sea air, tropical atmospheres or corrosive industrial atmospheres.
  • This film is medium hard, but wax-like and dry to the touch. Thanks to its flexibility, it can absorb slight impacts without damage or crazing. If the scratch is deeper, the capillary activity and polarity properties of the film towards the treated surface prevent the scratch from spreading. This facility of the protection called «self-healing» allows handling of the pieces even after a prolonged storage time, without loss of the protective value of the SOCOPAC 50S film.
  • The dry film is intended to resist several years outside and above all to remain stable during this period. It does not suffer air-damage, by exposure to sun or to heat; it is not subjected to any cross linking or polymerisation and can be therefore removed several years after application as easily as the first day.
  • Though it has a particularly pronounced hydrophobic quality, SOCOPAC 50S was not designed for the role of a specifically hydrophobic compound. However its capillary properties allow it to protect and repel water in an efficient way any material normally exposed to open air. In cases of humid, enclosed conditions, materials and parts exposed to wide differences in temperature, before protection it is necessary to apply a water-repellent compound such as WADIS 24, or SOCOPAC 25H where a total thickness greater than 50 microns is required, before the SOCOPAC 50S coating.
  • Downloads

    download icon Safety Data Sheet