Permabond® 910 Clear Methyl Cyanoacrylate Adhesive - 3 Gram Tube

Our Part #: SGP102904
Manufacture Part #: CA009100MT011
Our Price: $4.29 (Each)

Bulk Shop & Save

  • 6 - 11 $4.16 ea.
  • 12 - 23 $4.03 ea.
  • 24 - 35 $3.92 ea.
  • 36 + $3.81 ea.

SkyGeek Shelf-Life Policy

Warning: This product may contain a chemical known by the State of California to cause health issues.

INTERNATIONAL SHIPPING

SkyGeek welcomes international orders!

Please note: such orders are funneled into our NY warehouse and may take an extra 7-10 days to process. The benefit to this: You get one package shipped which reduces added taxes and duties that may be incurred from multiple shipments.

Description

PERMABOND 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 910 will cure to a fixture strength in 10 seconds on most surfaces and strength develops rapidly. The adhesive was designed specifically for the bonding of metal surfaces, and provides excellent bond strength to steel, aluminum and most metal surfaces. The methyl cyanoacrylate will also adhere well to a wide variety of other materials including most plastics and rubbers.

Approvals/References/Specs

  • Federal Specification: A-A-3097 Type II Class 3
  • US Military: MIL-A-46050C Type II Class 3
  • Product Attributes

    Country of Origin
    Italy
    Size
    3 Gram
    Shipping Weight
    0.05 pounds
    ECCN
    EAR99
    UOM
    Each
    Color Family
    Clear
    Manufacturer P/N
    PERMABOND 910
    Schedule B Code
    3506.99.0000
    Pack Quantity
    1
    Ship Dimensions
    4 x 1 x 1 inches
    NSN
    8040-01-319-2532
    Size
    3 Gram Tube
    Color
    Clear
    Material
    Methyl Cyanoacrylate

    Other Part Numbers

    Physical Properties of Uncured Adhesive:
    • Chemical Composition: Methyl Cyanoacrylate
    • Appearance: Colorless
    • Viscosity @ 25°C: 70-90 mPa.s (cP)
    • Specific Gravity: 1.1
    Typical Curing Properties:
    • Maximum gap fill 0.15 mm 0.006 in
    • Fixture / handling time* (0.3 N/mm² shear strength is achieved):
      • 10-15 seconds (Steel)
      • 10-15 seconds (Buna N Rubber)
      • 10-15 seconds (Phenolic)
    • Full strength: 24 hours
    *Handling times can be affected by temperature, humidity and specific surfaces being bonded. Larger gaps or acidic surfaces will also reduce cure speed but this can be overcome by the use of Permabond C Surface Activator (CSA) or Permabond QFS 16.

    Typical Performance of Cured Adhesive:

    • Shear strength*(ISO4587):
      • Steel 23-29 N/mm² (3300-4200psi)
      • Aluminium 13-15 N/mm² (1900-2200psi)
      • Brass 21 N/mm² (3000psi)
      • Stainless Steel 21 N/mm² (3000psi)
      • Butyl Rubber >2 N/mm² (300psi) SF**
      • Nitrile Rubber >4 N/mm² (600psi) SF**
      • Phenolic >10 N/mm²² (1450psi) SF**
      • ABS >9 N/mm² (1300psi) SF**
      • Acrylic >14 N/mm² (2000psi)
    • Impact strength (ASTM D-950): 3-5 kJ/m² (1.4-2.4 ft-lb/in²)
    • Dielectric constant @10kHz: 2.5
    • Dielectric strength: 25 kV/mm
    • Coefficient of thermal expansion: 90 x 10-6 mm/mm/°C
    • Coefficient of thermal conductivity: 0.1 W/(m.K)
    • Hardness (ISO868): 85 Shore D

    *Strength results will vary depending on the level of surface preparation and gap.
    **SF = Substrate failure

    Product Details

    PERMABOND 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 910 will cure to a fixture strength in 10 seconds on most surfaces and strength develops rapidly. The adhesive was designed specifically for the bonding of metal surfaces, and provides excellent bond strength to steel, aluminum and most metal surfaces. The methyl cyanoacrylate will also adhere well to a wide variety of other materials including most plastics and rubbers.

    Approvals/References/Specs

  • Federal Specification: A-A-3097 Type II Class 3
  • US Military: MIL-A-46050C Type II Class 3
  • Product Attributes

    Country of Origin
    Italy
    Size
    3 Gram
    Shipping Weight
    0.05 pounds
    ECCN
    EAR99
    UOM
    Each
    Color Family
    Clear
    Manufacturer P/N
    PERMABOND 910
    Schedule B Code
    3506.99.0000
    Pack Quantity
    1
    Ship Dimensions
    4 x 1 x 1 inches
    NSN
    8040-01-319-2532
    Size
    3 Gram Tube
    Color
    Clear
    Material
    Methyl Cyanoacrylate

    Other Part Numbers

    Physical Properties of Uncured Adhesive:
    • Chemical Composition: Methyl Cyanoacrylate
    • Appearance: Colorless
    • Viscosity @ 25°C: 70-90 mPa.s (cP)
    • Specific Gravity: 1.1
    Typical Curing Properties:
    • Maximum gap fill 0.15 mm 0.006 in
    • Fixture / handling time* (0.3 N/mm² shear strength is achieved):
      • 10-15 seconds (Steel)
      • 10-15 seconds (Buna N Rubber)
      • 10-15 seconds (Phenolic)
    • Full strength: 24 hours
    *Handling times can be affected by temperature, humidity and specific surfaces being bonded. Larger gaps or acidic surfaces will also reduce cure speed but this can be overcome by the use of Permabond C Surface Activator (CSA) or Permabond QFS 16.

    Typical Performance of Cured Adhesive:

    • Shear strength*(ISO4587):
      • Steel 23-29 N/mm² (3300-4200psi)
      • Aluminium 13-15 N/mm² (1900-2200psi)
      • Brass 21 N/mm² (3000psi)
      • Stainless Steel 21 N/mm² (3000psi)
      • Butyl Rubber >2 N/mm² (300psi) SF**
      • Nitrile Rubber >4 N/mm² (600psi) SF**
      • Phenolic >10 N/mm²² (1450psi) SF**
      • ABS >9 N/mm² (1300psi) SF**
      • Acrylic >14 N/mm² (2000psi)
    • Impact strength (ASTM D-950): 3-5 kJ/m² (1.4-2.4 ft-lb/in²)
    • Dielectric constant @10kHz: 2.5
    • Dielectric strength: 25 kV/mm
    • Coefficient of thermal expansion: 90 x 10-6 mm/mm/°C
    • Coefficient of thermal conductivity: 0.1 W/(m.K)
    • Hardness (ISO868): 85 Shore D

    *Strength results will vary depending on the level of surface preparation and gap.
    **SF = Substrate failure

    Downloads

    PERMABOND 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 910 will cure to a fixture strength in 10 seconds on most surfaces and strength develops rapidly. The adhesive was designed specifically for the bonding of metal surfaces, and provides excellent bond strength to steel, aluminum and most metal surfaces. The methyl cyanoacrylate will also adhere well to a wide variety of other materials including most plastics and rubbers.

    Approvals/References/Specs

  • Federal Specification: A-A-3097 Type II Class 3
  • US Military: MIL-A-46050C Type II Class 3
  • Product Attributes

    Country of Origin
    Italy
    Size
    3 Gram
    Shipping Weight
    0.05 pounds
    ECCN
    EAR99
    UOM
    Each
    Color Family
    Clear
    Manufacturer P/N
    PERMABOND 910
    Schedule B Code
    3506.99.0000
    Pack Quantity
    1
    Ship Dimensions
    4 x 1 x 1 inches
    NSN
    8040-01-319-2532
    Size
    3 Gram Tube
    Color
    Clear
    Material
    Methyl Cyanoacrylate

    Other Part Numbers

    Physical Properties of Uncured Adhesive:
    • Chemical Composition: Methyl Cyanoacrylate
    • Appearance: Colorless
    • Viscosity @ 25°C: 70-90 mPa.s (cP)
    • Specific Gravity: 1.1
    Typical Curing Properties:
    • Maximum gap fill 0.15 mm 0.006 in
    • Fixture / handling time* (0.3 N/mm² shear strength is achieved):
      • 10-15 seconds (Steel)
      • 10-15 seconds (Buna N Rubber)
      • 10-15 seconds (Phenolic)
    • Full strength: 24 hours
    *Handling times can be affected by temperature, humidity and specific surfaces being bonded. Larger gaps or acidic surfaces will also reduce cure speed but this can be overcome by the use of Permabond C Surface Activator (CSA) or Permabond QFS 16.

    Typical Performance of Cured Adhesive:

    • Shear strength*(ISO4587):
      • Steel 23-29 N/mm² (3300-4200psi)
      • Aluminium 13-15 N/mm² (1900-2200psi)
      • Brass 21 N/mm² (3000psi)
      • Stainless Steel 21 N/mm² (3000psi)
      • Butyl Rubber >2 N/mm² (300psi) SF**
      • Nitrile Rubber >4 N/mm² (600psi) SF**
      • Phenolic >10 N/mm²² (1450psi) SF**
      • ABS >9 N/mm² (1300psi) SF**
      • Acrylic >14 N/mm² (2000psi)
    • Impact strength (ASTM D-950): 3-5 kJ/m² (1.4-2.4 ft-lb/in²)
    • Dielectric constant @10kHz: 2.5
    • Dielectric strength: 25 kV/mm
    • Coefficient of thermal expansion: 90 x 10-6 mm/mm/°C
    • Coefficient of thermal conductivity: 0.1 W/(m.K)
    • Hardness (ISO868): 85 Shore D

    *Strength results will vary depending on the level of surface preparation and gap.
    **SF = Substrate failure

    Description

    PERMABOND 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 910 will cure to a fixture strength in 10 seconds on most surfaces and strength develops rapidly. The adhesive was designed specifically for the bonding of metal surfaces, and provides excellent bond strength to steel, aluminum and most metal surfaces. The methyl cyanoacrylate will also adhere well to a wide variety of other materials including most plastics and rubbers.

    Approvals/References/Specs

  • Federal Specification: A-A-3097 Type II Class 3
  • US Military: MIL-A-46050C Type II Class 3
  • Product Attributes

    Country of Origin
    Italy
    Size
    3 Gram
    Shipping Weight
    0.05 pounds
    ECCN
    EAR99
    UOM
    Each
    Color Family
    Clear
    Manufacturer P/N
    PERMABOND 910
    Schedule B Code
    3506.99.0000
    Pack Quantity
    1
    Ship Dimensions
    4 x 1 x 1 inches
    NSN
    8040-01-319-2532
    Size
    3 Gram Tube
    Color
    Clear
    Material
    Methyl Cyanoacrylate

    Other Part Numbers

    Physical Properties of Uncured Adhesive:
    • Chemical Composition: Methyl Cyanoacrylate
    • Appearance: Colorless
    • Viscosity @ 25°C: 70-90 mPa.s (cP)
    • Specific Gravity: 1.1
    Typical Curing Properties:
    • Maximum gap fill 0.15 mm 0.006 in
    • Fixture / handling time* (0.3 N/mm² shear strength is achieved):
      • 10-15 seconds (Steel)
      • 10-15 seconds (Buna N Rubber)
      • 10-15 seconds (Phenolic)
    • Full strength: 24 hours
    *Handling times can be affected by temperature, humidity and specific surfaces being bonded. Larger gaps or acidic surfaces will also reduce cure speed but this can be overcome by the use of Permabond C Surface Activator (CSA) or Permabond QFS 16.

    Typical Performance of Cured Adhesive:

    • Shear strength*(ISO4587):
      • Steel 23-29 N/mm² (3300-4200psi)
      • Aluminium 13-15 N/mm² (1900-2200psi)
      • Brass 21 N/mm² (3000psi)
      • Stainless Steel 21 N/mm² (3000psi)
      • Butyl Rubber >2 N/mm² (300psi) SF**
      • Nitrile Rubber >4 N/mm² (600psi) SF**
      • Phenolic >10 N/mm²² (1450psi) SF**
      • ABS >9 N/mm² (1300psi) SF**
      • Acrylic >14 N/mm² (2000psi)
    • Impact strength (ASTM D-950): 3-5 kJ/m² (1.4-2.4 ft-lb/in²)
    • Dielectric constant @10kHz: 2.5
    • Dielectric strength: 25 kV/mm
    • Coefficient of thermal expansion: 90 x 10-6 mm/mm/°C
    • Coefficient of thermal conductivity: 0.1 W/(m.K)
    • Hardness (ISO868): 85 Shore D

    *Strength results will vary depending on the level of surface preparation and gap.
    **SF = Substrate failure

    Product Details

    PERMABOND 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 910 will cure to a fixture strength in 10 seconds on most surfaces and strength develops rapidly. The adhesive was designed specifically for the bonding of metal surfaces, and provides excellent bond strength to steel, aluminum and most metal surfaces. The methyl cyanoacrylate will also adhere well to a wide variety of other materials including most plastics and rubbers.

    Approvals/References/Specs

  • Federal Specification: A-A-3097 Type II Class 3
  • US Military: MIL-A-46050C Type II Class 3
  • Product Attributes

    Country of Origin
    Italy
    Size
    3 Gram
    Shipping Weight
    0.05 pounds
    ECCN
    EAR99
    UOM
    Each
    Color Family
    Clear
    Manufacturer P/N
    PERMABOND 910
    Schedule B Code
    3506.99.0000
    Pack Quantity
    1
    Ship Dimensions
    4 x 1 x 1 inches
    NSN
    8040-01-319-2532
    Size
    3 Gram Tube
    Color
    Clear
    Material
    Methyl Cyanoacrylate

    Other Part Numbers

    Physical Properties of Uncured Adhesive:
    • Chemical Composition: Methyl Cyanoacrylate
    • Appearance: Colorless
    • Viscosity @ 25°C: 70-90 mPa.s (cP)
    • Specific Gravity: 1.1
    Typical Curing Properties:
    • Maximum gap fill 0.15 mm 0.006 in
    • Fixture / handling time* (0.3 N/mm² shear strength is achieved):
      • 10-15 seconds (Steel)
      • 10-15 seconds (Buna N Rubber)
      • 10-15 seconds (Phenolic)
    • Full strength: 24 hours
    *Handling times can be affected by temperature, humidity and specific surfaces being bonded. Larger gaps or acidic surfaces will also reduce cure speed but this can be overcome by the use of Permabond C Surface Activator (CSA) or Permabond QFS 16.

    Typical Performance of Cured Adhesive:

    • Shear strength*(ISO4587):
      • Steel 23-29 N/mm² (3300-4200psi)
      • Aluminium 13-15 N/mm² (1900-2200psi)
      • Brass 21 N/mm² (3000psi)
      • Stainless Steel 21 N/mm² (3000psi)
      • Butyl Rubber >2 N/mm² (300psi) SF**
      • Nitrile Rubber >4 N/mm² (600psi) SF**
      • Phenolic >10 N/mm²² (1450psi) SF**
      • ABS >9 N/mm² (1300psi) SF**
      • Acrylic >14 N/mm² (2000psi)
    • Impact strength (ASTM D-950): 3-5 kJ/m² (1.4-2.4 ft-lb/in²)
    • Dielectric constant @10kHz: 2.5
    • Dielectric strength: 25 kV/mm
    • Coefficient of thermal expansion: 90 x 10-6 mm/mm/°C
    • Coefficient of thermal conductivity: 0.1 W/(m.K)
    • Hardness (ISO868): 85 Shore D

    *Strength results will vary depending on the level of surface preparation and gap.
    **SF = Substrate failure

    Downloads

    PERMABOND 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 910 will cure to a fixture strength in 10 seconds on most surfaces and strength develops rapidly. The adhesive was designed specifically for the bonding of metal surfaces, and provides excellent bond strength to steel, aluminum and most metal surfaces. The methyl cyanoacrylate will also adhere well to a wide variety of other materials including most plastics and rubbers.

    Approvals/References/Specs

  • Federal Specification: A-A-3097 Type II Class 3
  • US Military: MIL-A-46050C Type II Class 3
  • Product Attributes

    Country of Origin
    Italy
    Size
    3 Gram
    Shipping Weight
    0.05 pounds
    ECCN
    EAR99
    UOM
    Each
    Color Family
    Clear
    Manufacturer P/N
    PERMABOND 910
    Schedule B Code
    3506.99.0000
    Pack Quantity
    1
    Ship Dimensions
    4 x 1 x 1 inches
    NSN
    8040-01-319-2532
    Size
    3 Gram Tube
    Color
    Clear
    Material
    Methyl Cyanoacrylate

    Other Part Numbers

    Physical Properties of Uncured Adhesive:
    • Chemical Composition: Methyl Cyanoacrylate
    • Appearance: Colorless
    • Viscosity @ 25°C: 70-90 mPa.s (cP)
    • Specific Gravity: 1.1
    Typical Curing Properties:
    • Maximum gap fill 0.15 mm 0.006 in
    • Fixture / handling time* (0.3 N/mm² shear strength is achieved):
      • 10-15 seconds (Steel)
      • 10-15 seconds (Buna N Rubber)
      • 10-15 seconds (Phenolic)
    • Full strength: 24 hours
    *Handling times can be affected by temperature, humidity and specific surfaces being bonded. Larger gaps or acidic surfaces will also reduce cure speed but this can be overcome by the use of Permabond C Surface Activator (CSA) or Permabond QFS 16.

    Typical Performance of Cured Adhesive:

    • Shear strength*(ISO4587):
      • Steel 23-29 N/mm² (3300-4200psi)
      • Aluminium 13-15 N/mm² (1900-2200psi)
      • Brass 21 N/mm² (3000psi)
      • Stainless Steel 21 N/mm² (3000psi)
      • Butyl Rubber >2 N/mm² (300psi) SF**
      • Nitrile Rubber >4 N/mm² (600psi) SF**
      • Phenolic >10 N/mm²² (1450psi) SF**
      • ABS >9 N/mm² (1300psi) SF**
      • Acrylic >14 N/mm² (2000psi)
    • Impact strength (ASTM D-950): 3-5 kJ/m² (1.4-2.4 ft-lb/in²)
    • Dielectric constant @10kHz: 2.5
    • Dielectric strength: 25 kV/mm
    • Coefficient of thermal expansion: 90 x 10-6 mm/mm/°C
    • Coefficient of thermal conductivity: 0.1 W/(m.K)
    • Hardness (ISO868): 85 Shore D

    *Strength results will vary depending on the level of surface preparation and gap.
    **SF = Substrate failure