Zip-Chem® 008353 Formit®-18-90-FOG 90° Fogging Fan Spray

The Formit-18 extension tube kit was developed to assist in the application of our aerosol corrosion inhibiting compounds Noxit 86, D-5023NS, D-5029NS and Cor-Ban 35. Difficult access areas in aircraft structures present some challenges where application of CICs are critical. It is in these areas where lack of protection can cause the onset of major undetected corrosion. The corrosion inhibiting compounds are designed to be applied at a wet film thickness of 1-2 mils. The 18" long extension tube and aluminum sleeve can be formed into a variety of angles to allow access into recessed areas, and will allow for a 360° reverse spray. We now offer 5 versions of the Formit-18 to enhance specific application requirements. The Formit-18 extension tube will become your unique tool to solve application problems that cause voids of coverage or dramatic flooding and over coverage. For best results, sharp angles should be achieved by carefully bending the tube around a piece of pipe to insure a non-crimped passage for material flow. The tube can be reshaped, but we suggest that you re-use the tube that has been shaped to solve your particular application concerns. The Formit-18 consists of a pre-assembled female actuator, 18" length of flexible plastic tubing, with a 12" length of aluminum sleeve.