Please note: International orders are shipped from their respective locations, which may take an additional 7-10 days to process. We strive to consolidate items into one shipment to minimize duties and taxes. However, if items are located in different locations, separate shipments may be necessary.
JetFlex Low Gloss Polyurethane is a two component polyurethane coating formulated for the finishing and refinishing of plastic and metal components within the cabin and cockpit of commercial aircraft. JetFlex products meet the Boeing 10-83D Ty II & III specification and FAA FAR 25.853 regulation.
Meets flammability, yellowing resistance and smoke stain requirements of the Boeing BMS 10-83D spec. fast drying, very good physical and chemical resistance, and excellent flexibility. Mix ratio 7:1
Coating Properties
Base Component
Admixed
Solids By Weight (White) By Volume (White)
52.3 +/- 2.0% 28.5 +/- 1.6%
47.0 +/- 2.0% 27.0 +/- 1.6%
Wt./Gal. (White)
10.9 +/- .25 lbs.
9.9 +/- 2.5 lbs.
Sp. Gravity (White)
1.31 +/- .03
1.19 +/- .03
Typical Properties
Viscosity (Sprayable), Gardner Signature #2 Zahn Cup
20-24 seconds
Admixed V.O.C. (Mixed 7:1:2) U.S. Exempt Solvent Non-Exempt Solvent
<6.1 lbs./gal (730 g/L) <6.1 lbs./gal (730 g/L)
Useable Pot Life @ 77°F/25°C
16 hours
Gloss Type II - Low Gloss (L- Colors) Type III - Flat (E- Colors)
20-30 units 8-12 units
Theoretical Coverage Per dry mil (white) Per 25 microns (white)
432 sq. ft.2/gal. 10.6 m2/L
Dry Film Weight Per dry mil (white) Per 25 microns (white)
INTERNATIONAL SHIPPING
HAZMAT ORDERS
Country of Origin
