ROYCO® 560 MIL-PRF-23699G HTS Class Spec Advanced Synthetic Gas Turbine Engine Oil - 24 Quart/Case

ROYCO 560 is a third generation fluid that was specifically developed for use in high performance turboprop and turbojet engines operating at higher temperatures, as well as industrial gas turbine engines, where longer engine life and higher thermal stability are required.

ROYCO 560 has been developed for the increased demands of the latest technological developments in gas turbine engines. With the advent of higher bypass ratio engines, higher thrust output, and consequently higher engine operating temperatures and pressures, this fluid has demonstrated a remarkable savings in lower maintenance costs and down time. ROYCO 560 surpasses the performance of traditional Type II fluids by combining higher thermal-oxidative stability with lower carbon residue formation. This results in better engine performance and longer periods between MOH. In addition, this third generation oil may be used in any older engine designed to run on Mil-PRF-23699 type fluids so that even these engines can realise the same performance benefits. It has been demonstrated that third generation fluids can offer significant advantages over traditional oils in terms of lubricant life, engine cleanliness, and reduced emissions. ROYCO 560 is well suited for use in engines that require minimum sludge and coke deposition. It is also recommended for helicopter transmissions.