Zip-Chem® 009444 Calla® 500 Overseas Variant Aircraft Cleaning & Degreasing Compound - Gallon Jug

Our Part #: SGP444
Manufacture Part #: 009444
Our Price: $39.07 (Each)

Bulk Shop & Save

  • 4 - 7 $38.54 Each
  • 8 - 11 $38.02 Each
  • 12 + $37.51 Each
world wide icon INTERNATIONAL SHIPPING

SkyGeek welcomes international orders!

Please note: such orders are funneled into our NY warehouse and may take an extra 7-10 days to process. The benefit to this: You get one package shipped which reduces added taxes and duties that may be incurred from multiple shipments.

When dealing with cleaners for your aircraft there are two questions to consider: Will it work and is it safe? Zip Chem's Calla 500 answers in the affirmative on both accounts. Calla 500 is a highly concentrated and versatile alkaline water-based cleaner primarily used for removing exhaust stains; it can be applied to general aircraft. In regards to safety, this cleaner meets the requirements stated in specification MIL-C-25769G. When tests are conducted in accordance with this specification, Calla 500 is approved for use on aluminum alloys, magnesium alloys and cadmium plated steel.

Calla 500°Ffers users a multitude of benefits and features:

  • Does not cause crazing or cracking of acrylic base plastics under stress
  • Formulated with biodegradable detergents
  • Contains no harmful concentrations of phenols, chromates or chlorinated solvents
  • Also recommended for use on all aviation related ground service equipment
  • Conforms to specifications: Mil-C-25769G, AMS-1526-B, D6-17487, and CSD-1
  • pplication p> The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

    General Cleaning With Water Solution: Mix one part Calla 500 with 30 parts water. Apply by spray or mop and allow a few minutes to penetrate. Then agitate with brush or mop and rinse with water.

    General Cleaning With Foam: Mix one part Calla 500 with 30 parts water. Apply through a foam generator. Then agitate the foam on the surface with brush or mop and rinse with water.

    Heavy Duty Cleaning (Water Mix): Mix one part Calla 500 with five parts water and use above procedure.

    Heavy Duty Cleaning (Solvent Mix): Mix one part Calla 500 with one part water and seven parts petroleum solvent and agitate with air to form a thick creamy emulsion. Apply the emulsion with spray or mop and allow a few minutes for penetration. Then agitate with brush or mop and rinse with water.

    For extremely dirty areas, a mixture of one part Calla 500 with four parts solvent may be used. The viscosity of the emulsion may be adjusted by adding more solvent to thicken or more Calla 500 to thin. Any emulsion left from previous day's use would be agitated before using.

    Product Attributes

    Country of Origin
    United States
    Size
    Gallon
    Shipping Weight
    13 pounds
    ECCN
    EAR99
    Manufacturer P/N
    Calla 500
    Schedule B Code
    3401.20.0000
    Pack Quantity
    1
    Size
    Gallon Jug
    Variant
    Overseas

    Other Part Numbers

    Description

    When dealing with cleaners for your aircraft there are two questions to consider: Will it work and is it safe? Zip Chem's Calla 500 answers in the affirmative on both accounts. Calla 500 is a highly concentrated and versatile alkaline water-based cleaner primarily used for removing exhaust stains; it can be applied to general aircraft. In regards to safety, this cleaner meets the requirements stated in specification MIL-C-25769G. When tests are conducted in accordance with this specification, Calla 500 is approved for use on aluminum alloys, magnesium alloys and cadmium plated steel.

    Calla 500°Ffers users a multitude of benefits and features:

  • Does not cause crazing or cracking of acrylic base plastics under stress
  • Formulated with biodegradable detergents
  • Contains no harmful concentrations of phenols, chromates or chlorinated solvents
  • Also recommended for use on all aviation related ground service equipment
  • Conforms to specifications: Mil-C-25769G, AMS-1526-B, D6-17487, and CSD-1
  • pplication p> The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

    General Cleaning With Water Solution: Mix one part Calla 500 with 30 parts water. Apply by spray or mop and allow a few minutes to penetrate. Then agitate with brush or mop and rinse with water.

    General Cleaning With Foam: Mix one part Calla 500 with 30 parts water. Apply through a foam generator. Then agitate the foam on the surface with brush or mop and rinse with water.

    Heavy Duty Cleaning (Water Mix): Mix one part Calla 500 with five parts water and use above procedure.

    Heavy Duty Cleaning (Solvent Mix): Mix one part Calla 500 with one part water and seven parts petroleum solvent and agitate with air to form a thick creamy emulsion. Apply the emulsion with spray or mop and allow a few minutes for penetration. Then agitate with brush or mop and rinse with water.

    For extremely dirty areas, a mixture of one part Calla 500 with four parts solvent may be used. The viscosity of the emulsion may be adjusted by adding more solvent to thicken or more Calla 500 to thin. Any emulsion left from previous day's use would be agitated before using.

    Product Attributes

    Country of Origin
    United States
    Size
    Gallon
    Shipping Weight
    13 pounds
    ECCN
    EAR99
    Manufacturer P/N
    Calla 500
    Schedule B Code
    3401.20.0000
    Pack Quantity
    1
    Size
    Gallon Jug
    Variant
    Overseas

    Other Part Numbers

    Product Details

    When dealing with cleaners for your aircraft there are two questions to consider: Will it work and is it safe? Zip Chem's Calla 500 answers in the affirmative on both accounts. Calla 500 is a highly concentrated and versatile alkaline water-based cleaner primarily used for removing exhaust stains; it can be applied to general aircraft. In regards to safety, this cleaner meets the requirements stated in specification MIL-C-25769G. When tests are conducted in accordance with this specification, Calla 500 is approved for use on aluminum alloys, magnesium alloys and cadmium plated steel.

    Calla 500°Ffers users a multitude of benefits and features:

  • Does not cause crazing or cracking of acrylic base plastics under stress
  • Formulated with biodegradable detergents
  • Contains no harmful concentrations of phenols, chromates or chlorinated solvents
  • Also recommended for use on all aviation related ground service equipment
  • Conforms to specifications: Mil-C-25769G, AMS-1526-B, D6-17487, and CSD-1
  • pplication p> The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

    General Cleaning With Water Solution: Mix one part Calla 500 with 30 parts water. Apply by spray or mop and allow a few minutes to penetrate. Then agitate with brush or mop and rinse with water.

    General Cleaning With Foam: Mix one part Calla 500 with 30 parts water. Apply through a foam generator. Then agitate the foam on the surface with brush or mop and rinse with water.

    Heavy Duty Cleaning (Water Mix): Mix one part Calla 500 with five parts water and use above procedure.

    Heavy Duty Cleaning (Solvent Mix): Mix one part Calla 500 with one part water and seven parts petroleum solvent and agitate with air to form a thick creamy emulsion. Apply the emulsion with spray or mop and allow a few minutes for penetration. Then agitate with brush or mop and rinse with water.

    For extremely dirty areas, a mixture of one part Calla 500 with four parts solvent may be used. The viscosity of the emulsion may be adjusted by adding more solvent to thicken or more Calla 500 to thin. Any emulsion left from previous day's use would be agitated before using.

    Product Attributes

    Country of Origin
    United States
    Size
    Gallon
    Shipping Weight
    13 pounds
    ECCN
    EAR99
    Manufacturer P/N
    Calla 500
    Schedule B Code
    3401.20.0000
    Pack Quantity
    1
    Size
    Gallon Jug
    Variant
    Overseas

    Other Part Numbers

    Downloads

    When dealing with cleaners for your aircraft there are two questions to consider: Will it work and is it safe? Zip Chem's Calla 500 answers in the affirmative on both accounts. Calla 500 is a highly concentrated and versatile alkaline water-based cleaner primarily used for removing exhaust stains; it can be applied to general aircraft. In regards to safety, this cleaner meets the requirements stated in specification MIL-C-25769G. When tests are conducted in accordance with this specification, Calla 500 is approved for use on aluminum alloys, magnesium alloys and cadmium plated steel.

    Calla 500°Ffers users a multitude of benefits and features:

  • Does not cause crazing or cracking of acrylic base plastics under stress
  • Formulated with biodegradable detergents
  • Contains no harmful concentrations of phenols, chromates or chlorinated solvents
  • Also recommended for use on all aviation related ground service equipment
  • Conforms to specifications: Mil-C-25769G, AMS-1526-B, D6-17487, and CSD-1
  • pplication p> The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

    General Cleaning With Water Solution: Mix one part Calla 500 with 30 parts water. Apply by spray or mop and allow a few minutes to penetrate. Then agitate with brush or mop and rinse with water.

    General Cleaning With Foam: Mix one part Calla 500 with 30 parts water. Apply through a foam generator. Then agitate the foam on the surface with brush or mop and rinse with water.

    Heavy Duty Cleaning (Water Mix): Mix one part Calla 500 with five parts water and use above procedure.

    Heavy Duty Cleaning (Solvent Mix): Mix one part Calla 500 with one part water and seven parts petroleum solvent and agitate with air to form a thick creamy emulsion. Apply the emulsion with spray or mop and allow a few minutes for penetration. Then agitate with brush or mop and rinse with water.

    For extremely dirty areas, a mixture of one part Calla 500 with four parts solvent may be used. The viscosity of the emulsion may be adjusted by adding more solvent to thicken or more Calla 500 to thin. Any emulsion left from previous day's use would be agitated before using.

    Product Attributes

    Country of Origin
    United States
    Size
    Gallon
    Shipping Weight
    13 pounds
    ECCN
    EAR99
    Manufacturer P/N
    Calla 500
    Schedule B Code
    3401.20.0000
    Pack Quantity
    1
    Size
    Gallon Jug
    Variant
    Overseas

    Other Part Numbers

    When dealing with cleaners for your aircraft there are two questions to consider: Will it work and is it safe? Zip Chem's Calla 500 answers in the affirmative on both accounts. Calla 500 is a highly concentrated and versatile alkaline water-based cleaner primarily used for removing exhaust stains; it can be applied to general aircraft. In regards to safety, this cleaner meets the requirements stated in specification MIL-C-25769G. When tests are conducted in accordance with this specification, Calla 500 is approved for use on aluminum alloys, magnesium alloys and cadmium plated steel.

    Calla 500°Ffers users a multitude of benefits and features:

  • Does not cause crazing or cracking of acrylic base plastics under stress
  • Formulated with biodegradable detergents
  • Contains no harmful concentrations of phenols, chromates or chlorinated solvents
  • Also recommended for use on all aviation related ground service equipment
  • Conforms to specifications: Mil-C-25769G, AMS-1526-B, D6-17487, and CSD-1
  • pplication p> The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

    General Cleaning With Water Solution: Mix one part Calla 500 with 30 parts water. Apply by spray or mop and allow a few minutes to penetrate. Then agitate with brush or mop and rinse with water.

    General Cleaning With Foam: Mix one part Calla 500 with 30 parts water. Apply through a foam generator. Then agitate the foam on the surface with brush or mop and rinse with water.

    Heavy Duty Cleaning (Water Mix): Mix one part Calla 500 with five parts water and use above procedure.

    Heavy Duty Cleaning (Solvent Mix): Mix one part Calla 500 with one part water and seven parts petroleum solvent and agitate with air to form a thick creamy emulsion. Apply the emulsion with spray or mop and allow a few minutes for penetration. Then agitate with brush or mop and rinse with water.

    For extremely dirty areas, a mixture of one part Calla 500 with four parts solvent may be used. The viscosity of the emulsion may be adjusted by adding more solvent to thicken or more Calla 500 to thin. Any emulsion left from previous day's use would be agitated before using.

    Product Attributes

    Country of Origin
    United States
    Size
    Gallon
    Shipping Weight
    13 pounds
    ECCN
    EAR99
    Manufacturer P/N
    Calla 500
    Schedule B Code
    3401.20.0000
    Pack Quantity
    1
    Size
    Gallon Jug
    Variant
    Overseas

    Other Part Numbers

    Description

    When dealing with cleaners for your aircraft there are two questions to consider: Will it work and is it safe? Zip Chem's Calla 500 answers in the affirmative on both accounts. Calla 500 is a highly concentrated and versatile alkaline water-based cleaner primarily used for removing exhaust stains; it can be applied to general aircraft. In regards to safety, this cleaner meets the requirements stated in specification MIL-C-25769G. When tests are conducted in accordance with this specification, Calla 500 is approved for use on aluminum alloys, magnesium alloys and cadmium plated steel.

    Calla 500°Ffers users a multitude of benefits and features:

  • Does not cause crazing or cracking of acrylic base plastics under stress
  • Formulated with biodegradable detergents
  • Contains no harmful concentrations of phenols, chromates or chlorinated solvents
  • Also recommended for use on all aviation related ground service equipment
  • Conforms to specifications: Mil-C-25769G, AMS-1526-B, D6-17487, and CSD-1
  • pplication p> The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

    General Cleaning With Water Solution: Mix one part Calla 500 with 30 parts water. Apply by spray or mop and allow a few minutes to penetrate. Then agitate with brush or mop and rinse with water.

    General Cleaning With Foam: Mix one part Calla 500 with 30 parts water. Apply through a foam generator. Then agitate the foam on the surface with brush or mop and rinse with water.

    Heavy Duty Cleaning (Water Mix): Mix one part Calla 500 with five parts water and use above procedure.

    Heavy Duty Cleaning (Solvent Mix): Mix one part Calla 500 with one part water and seven parts petroleum solvent and agitate with air to form a thick creamy emulsion. Apply the emulsion with spray or mop and allow a few minutes for penetration. Then agitate with brush or mop and rinse with water.

    For extremely dirty areas, a mixture of one part Calla 500 with four parts solvent may be used. The viscosity of the emulsion may be adjusted by adding more solvent to thicken or more Calla 500 to thin. Any emulsion left from previous day's use would be agitated before using.

    Product Attributes

    Country of Origin
    United States
    Size
    Gallon
    Shipping Weight
    13 pounds
    ECCN
    EAR99
    Manufacturer P/N
    Calla 500
    Schedule B Code
    3401.20.0000
    Pack Quantity
    1
    Size
    Gallon Jug
    Variant
    Overseas

    Other Part Numbers

    Product Details

    When dealing with cleaners for your aircraft there are two questions to consider: Will it work and is it safe? Zip Chem's Calla 500 answers in the affirmative on both accounts. Calla 500 is a highly concentrated and versatile alkaline water-based cleaner primarily used for removing exhaust stains; it can be applied to general aircraft. In regards to safety, this cleaner meets the requirements stated in specification MIL-C-25769G. When tests are conducted in accordance with this specification, Calla 500 is approved for use on aluminum alloys, magnesium alloys and cadmium plated steel.

    Calla 500°Ffers users a multitude of benefits and features:

  • Does not cause crazing or cracking of acrylic base plastics under stress
  • Formulated with biodegradable detergents
  • Contains no harmful concentrations of phenols, chromates or chlorinated solvents
  • Also recommended for use on all aviation related ground service equipment
  • Conforms to specifications: Mil-C-25769G, AMS-1526-B, D6-17487, and CSD-1
  • pplication p> The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

    General Cleaning With Water Solution: Mix one part Calla 500 with 30 parts water. Apply by spray or mop and allow a few minutes to penetrate. Then agitate with brush or mop and rinse with water.

    General Cleaning With Foam: Mix one part Calla 500 with 30 parts water. Apply through a foam generator. Then agitate the foam on the surface with brush or mop and rinse with water.

    Heavy Duty Cleaning (Water Mix): Mix one part Calla 500 with five parts water and use above procedure.

    Heavy Duty Cleaning (Solvent Mix): Mix one part Calla 500 with one part water and seven parts petroleum solvent and agitate with air to form a thick creamy emulsion. Apply the emulsion with spray or mop and allow a few minutes for penetration. Then agitate with brush or mop and rinse with water.

    For extremely dirty areas, a mixture of one part Calla 500 with four parts solvent may be used. The viscosity of the emulsion may be adjusted by adding more solvent to thicken or more Calla 500 to thin. Any emulsion left from previous day's use would be agitated before using.

    Product Attributes

    Country of Origin
    United States
    Size
    Gallon
    Shipping Weight
    13 pounds
    ECCN
    EAR99
    Manufacturer P/N
    Calla 500
    Schedule B Code
    3401.20.0000
    Pack Quantity
    1
    Size
    Gallon Jug
    Variant
    Overseas

    Other Part Numbers

    Downloads

    When dealing with cleaners for your aircraft there are two questions to consider: Will it work and is it safe? Zip Chem's Calla 500 answers in the affirmative on both accounts. Calla 500 is a highly concentrated and versatile alkaline water-based cleaner primarily used for removing exhaust stains; it can be applied to general aircraft. In regards to safety, this cleaner meets the requirements stated in specification MIL-C-25769G. When tests are conducted in accordance with this specification, Calla 500 is approved for use on aluminum alloys, magnesium alloys and cadmium plated steel.

    Calla 500°Ffers users a multitude of benefits and features:

  • Does not cause crazing or cracking of acrylic base plastics under stress
  • Formulated with biodegradable detergents
  • Contains no harmful concentrations of phenols, chromates or chlorinated solvents
  • Also recommended for use on all aviation related ground service equipment
  • Conforms to specifications: Mil-C-25769G, AMS-1526-B, D6-17487, and CSD-1
  • pplication p> The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

    General Cleaning With Water Solution: Mix one part Calla 500 with 30 parts water. Apply by spray or mop and allow a few minutes to penetrate. Then agitate with brush or mop and rinse with water.

    General Cleaning With Foam: Mix one part Calla 500 with 30 parts water. Apply through a foam generator. Then agitate the foam on the surface with brush or mop and rinse with water.

    Heavy Duty Cleaning (Water Mix): Mix one part Calla 500 with five parts water and use above procedure.

    Heavy Duty Cleaning (Solvent Mix): Mix one part Calla 500 with one part water and seven parts petroleum solvent and agitate with air to form a thick creamy emulsion. Apply the emulsion with spray or mop and allow a few minutes for penetration. Then agitate with brush or mop and rinse with water.

    For extremely dirty areas, a mixture of one part Calla 500 with four parts solvent may be used. The viscosity of the emulsion may be adjusted by adding more solvent to thicken or more Calla 500 to thin. Any emulsion left from previous day's use would be agitated before using.

    Product Attributes

    Country of Origin
    United States
    Size
    Gallon
    Shipping Weight
    13 pounds
    ECCN
    EAR99
    Manufacturer P/N
    Calla 500
    Schedule B Code
    3401.20.0000
    Pack Quantity
    1
    Size
    Gallon Jug
    Variant
    Overseas

    Other Part Numbers