Everlube Perma-Slik G Solid Film Lubricant from SkyGeek is designed to deliver top-quality lubrication and corrosion protection without the mess of a traditional lubricant. The dry film lubricant comes in a spray can for easy application but dries quickly at room temperature to form a solid. The non-tacky lubricant is perfect for use throughout your aircraft in places where you need friction and corrosion resistance without the mess. The lubricant is MoS2 based with an epoxy binder system for better adhesion and performance. This easy-to-use coating provides a low coefficient of friction and is even able to stand up to moist environments, making it a great choice for damp environments. Everlube Perma-Silk G lubricant performs best in higher load carrying applications.
Everlube Perma-Silk G Solid Film Lubricant from SkyGeek is sold in a convenient 12-ounce aerosol spray can for easy application. The can is resealable and can be stored at room temperature between uses. The single-component formula requires only a quick shake before use and once applied, the lubricant dries quickly to a workable solid. Perms-Silk G Lubricant is priced competitively and volume discounts are available on bulk orders for an even greater value. A manufacturer's certification may be added to any order for an additional charge, making this lubricant a great choice for industrial users.
Approvals/References/Specification
US Military Specification: MIL-PRF-46147C, Type I, Form 2 (Color 1 = Natural, Color 2 = Black/Gray (FED.STD.595 #37038-36076))
- Good corrosion resistance
- Good coefficient of friction
- Suitable for field applications
- Ideal for higher load carrying applications
Physical Properties - Lubricating Solids: MoS2
- Binder: Epoxy
- Color and Appearance*: Gray/Black Matte finish
- Carrier: Solvent based
- Solids (by weight)*: 24% to 26%
- Density*: 8.15 ± 0.5 lb/gal (977 ± 60 grams/liter)
- Flash Point: 24°F (-4°C)
- Volatile Organic Compound: 737 grams/liter (6.15 lb/gal)
- Theoretical Coverage: 286 ft2/gal @ 0.5 mils (7 m2/liter @ 12.7 microns)
- Alternative or Repair Coatings: Solvent based thermally cured equivalents for Perma-Slik G are Everlube 620C, Ecoalube 642, Lube Lok 5306, Everlube 733, and Lube Lok 2109. Water based thermally cured equivalents are Everlube 9002.
| ASTM Test Method | Value |
|---|
| Corrosion Resistance* | | |
| Test Panel | ASTM B117 | >100 hrs. @ 5% neutral salt spray |
| Test Panel Coating Method | | 0.6 mil on grit blasted steel panel |
| Abrasion Resistance | ASTM D4060 | Fair |
| Coefficient of Friction | ASTM D2714 | 0.04 to 0.06 |
| Operating Temperature Range | | -100°F to 250°F (-73 to 121°C) |
| Load Carrying Capacity* | ASTM 2625 Method B | >250,000 psi |
| Wear Life* | ASTM 2625 Method A | >120 minutes |
| Film Adhesion* | ASTM D2510 Method A | Pass |
| Sulfurous acid salt spray* | Fed-STD-791, Method 5331 | Pass 4 cycles |
| Pencil Hardness* | ASTM D-3363 | >3H (gouge) |
| Chemical Resistance (ASTM D-2510, Method C) | |
| Volume in Ounces: | 16 ounces |
| Net Weight in Ounces: | 12 ounces |
Safety Data Sheet
INTERNATIONAL SHIPPING
HAZMAT ORDERS
Country of Origin