Corrosion inhibiting primerDries hard in 15 minutesVOC compliant
Country of Origin
Schedule B Code
3 x 3 x 8 inches
TT-P-1757B Type I Class C Color Y
TT-P-1757B, Type I, Class C, Color Y
Use outdoors or in a well-ventilated area. Use when temperature is between 50°F and 90°F (10-32°C) and humidity is below 85% to insure proper drying. Avoid spraying in very windy, dusty conditions. Cover surrounding area from spray mist.
Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces. Clean with soap and water, rinse and let dry. WARNING: If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC.
Shake can vigorously for one minute after mixing ball begins to rattle. Hold can upright 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep can in motion while spraying. Apply 2 or more light coats a few minutes apart.
Dry & Recoat Times
Dries hard in 15 minutes based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Apply second coat or topcoat within one hour or after 48 hours.
When finished spraying, clear spray valve by turning can upside down and pushing spray button for 5 seconds. Clean wet paint with a solvent such as mineral spirits. Throw away empty can in trash pick-up. Do not burn or place in trash compactor.
If valve clogs, twist and pull off spray tip and rinse it in a solvent such as mineral spirits. Do not stick a pin or other object into the stem.