PPG® DeSoto® 515X349 Green BMS 10-79R Type III Class A Grade A Spec Exterior Epoxy Primer - Gallon Kit

PPG® DeSoto® 515X349 Green BMS 10-79R Type III Class A Grade A Spec Exterior Epoxy Primer - Gallon Kit
Our Part #: SGP5494
Manufacture Part #: 0515X349XXIKG22K
Our Price: $594.90
Price Per Each

Bulk Shop & Save

  • 4 - 7 $586.40 ea.
  • 8 - 11 $578.15 ea.
  • 12 - 23 $570.12 ea.
  • 24 + $562.31 ea.
Adding to cart… The item has been added

world wide icon INTERNATIONAL SHIPPING

SkyGeek welcomes international orders!

Please note: International orders are shipped from their respective locations, which may take an additional 7-10 days to process. We strive to consolidate items into one shipment to minimize duties and taxes. However, if items are located in different locations, separate shipments may be necessary.

Hazmat Order icon HAZMAT ORDERS
Safety Data Sheet download icon

SkyGeek Shelf-Life Policy

Warning: This product may contain a chemical known by the State of California to cause health issues. Details found here www.p65warnings.ca.gov

UN Number: UN1263

UN Class: 3

Shop for PPG PRC-DeSoto Exterior Epoxy Primer in a gallon-size kit at SkyGeek and treat your aircraft to a fresh new look. The primer is designed to go on easily and works well in almost any exterior application. The formula is weather-resistant and boasts a wide service temperature range so it can be used in any environment. The primer is sold in a two-part kit where the activator is kept separate from the base material. By keeping the individual components separate, the primer won't prematurely cure, ensuring maximum effectiveness.

Typical Application & Performance Properties
Application Temperature 65°-95°F (18.3°-35°C)
Application Humidity 18%-95%
Mix Ratio (by volume)
515X349 (Base)
910X533 (Activator)

1 part
1 part
Viscosity
Initial (#1 Zahn cup)
Pot Life (8 hours)

30 - 40 seconds
30 - 40 second max. rise
VOC, EPA method 24 650 grams/l
Dry Film Density 0.00956 lbs./square ft. @ 1.0 mil dry film
Theoretical Coverage 375 square ft./gal. @ 1.0 mil dry film
Recommended Dry Film Thickness 0.5 to 0.9 mils (12.5 - 22.5 microns)
Drying Times @ 75°F (23.9°C)
Tack free
Dry to tape
Dry to topcoat
Dry to fly
Full cure

30 min. max.
2 hours
2 - 72 hours
48 hours
7 days
Accelerated Cure 15 minutes flash off @ 75°F (23.9°C), then 30 minutes at 140°F (60°C)
Color Green
Spray Equipment Compatible with all forms of spray equipment (except for BMS 10-79 Type II & III Class A)
Shelf Life 12 months from date of manufacture
Service Temperature -65°F - 350°F (-54°C - 176.7°C) - Conforms
Flexibility 180° Conical Mandrel - Conforms
Impact Resistance
40 inch/lbs. (46 cm/kg), Gardner - Conforms
Film Hardness
H pencil minimum

Conforms
Fluid Resistance
Skydrol (LD-4), 30 days @ 75°F (23.9°C)
Distilled H20, 7 days @ 75°F (23.9°C

Conforms
Conforms
Corrosion (with BMS 10-60 or DMS 2143 topcoats)
Salt Spray
Passes 3000 hours - Conforms
Filiform Passes 30 days @ 100°F (37.8°C) and 85% RH - Conforms
Dissimilar Metals 5% salt spray for 2000 hours - Conforms
Rain erosion Whirling arm - Conforms

Downloads

download icon Safety Data Sheet

Country of Origin
United States
Size
Gallon
Shipping Weight
13 pounds
ECCN
EAR99
Color Family
Green
Manufacturer P/N
515X349
Schedule B Code
3208.90.0000
Pack Quantity
1
Ship Dimensions
14 x 7 x 8 inches
Size
Gallon Kit
Spec
BMS10-79R Type III, Class A, Grade A
Color
Green
Boeing PN/Spec#
BMS10-79 Rev. R Type III, Class A, Grade A
Boeing M.D. PN/Spec#
DMS 2144 Composition A, STM0791
Bombardier PN/Spec#
DHMS C4.18 Type III Class A Grade
Lockheed PN/Spec#
STMGK 189, STM-P-K104
Alternate PN#s
515X349/910X533, VMS, C4.18, Type, III, SMS-111204, Type, 1