Momentive RTV60 Silicone Rubber Compound from SkyGeek is used for a variety of applications that require high-heat resistance and flexibility. Use the formula for potting and encapsulating electric motors and transformers, for fabricating rubber parts, casting molds and more. The two-part silicone elastomer is sold in a convenient kit that keeps the components separated until just prior to use. When ready to apply, simply mix the parts together as indicated in the instructions and spread the mixture over the surface you are working on.
Momentive RTV60 Silicone Rubber Compound uses a base compound and DBT (dibutyl tin dilaurate) as the standard curing agent. DBT is suitable for most applications, however other catalysts are available to facilitate deep section cure, faster cure and automated mixing. Choose the catalyst that best works with your project to ensure quality results. Once applied, Momentive RTV60 forms a high-temp silicone rubber sheet that protects and encapsulates all at once. The formula is priced low and ships quickly from our NY warehouse.
Typical Applications:
Potting and encapsulating electric motors and transformers
Fabrication of rubber parts
Casting molds for low-melting point metals
Release applications such as rubber rollers
Thermal insulation
- Variable work times and cure rates by adjusting the amount and type of curing agent
- Room temperature cure
- Composition free of solvents and solvent odor
- Excellent adhesion capabilities with primer
- Excellent release properties
- Retention of elastomeric properties at temperatures from -54°C(-65°F) up to 260°C (500°F) continuously, and up to 316°C (600°F) for short periods of time
Uncured Properties of RTV Base Compounds- Color: Red
- Consistency: Pourable
- Viscosity, cps: 47,000
- Specific Gravity: 1.48
Uncured Properties- Work Time @ 25C (77F), hrs: 2
- Cure Time @ 25C (77F), hrs: 24
Cured Properties (0.5 wt. % DBT Curing Agent added, cured 7 days at 25°C (77°F) and 50% R.H.):Mechanical- Hardness, Shore A Durometer: 57
- Tensile Strength, kg/cm2 (psi): 70 (990)
- Elongation, %: 120
- Tear Strength, kg/cm (lb/in): 7 (40)
- Shrinkage, %: 0.6
Electrical- Dielectric Strength, kv/mm (v/mil) (1.9 mm thick): 17.7 (450)
- Dielectric Constant @ 1000 Hz: 4
- Dissipation Factor @ 1000 Hz: 0.02
- Volume Resistivity, ohm-cm: 4.4 x 1014
Thermal- Useful Temperature Range,°C (°F): -54 to 500 (-65 to 500)
- Conductivity (W/m·K): 0.31
- Coefficient of Expansion, cm/cm, °C (in/in, ° F): 20 x 10-5 (11 x 10-5)
- Specific Heat, cal/(gm°C) / (BTU/(lb°F)): 0.35 / 0.35
Safety Data Sheet
INTERNATIONAL SHIPPING
HAZMAT ORDERS
Country of Origin