Electro 140° Contact Cleaner is a high flash point cleaner that penetrates, cleans and degreases, without leaving a residue. Electro 140°'s longer cleaning action is especially suited for cleaning electrical and electronic parts as well as other types of delicate mechanisms. Electro 140° does not contain CFCs, 1,1,1 trichloroethane or methylene chloride. Electro 140 has a flash point above 140°F which makes it safe to use in areas where flammability poses a potential problem. Electro 140° is safe to use on most surfaces, but may be harmful to some plastics. Because of its superior wetting action, Electro 140° Contact Cleaner penetrates into minute spaces for thorough and effective cleaning. To enhance drying time, air dry or wipe with an absorbent cloth after applying.
Country of Origin
Schedule B Code
3 x 3 x 8 inches
The high flash point, fast penetrating, non-residue cleaner alternative to CFCs for fine parts.
BAPS 180-009 Rev. C FE type cleaner
Flash point above 140°F (60°C) Superior wetting and penetrating action Controlled evaporation No residue Nonconductive Safe to use on most surfaces Inverta Spray Valve allows one to spray in an upright or inverted position
Flash point:144° F % Non-volatiles: <100 ppm KB value: 52 Specific gravity:0.797 @ 77°F Surface tension: 25.9 dynes/cm @ 77°F Propellant: Carbon Dioxide
Coin Counters & Chutes Connectors Contacts Fluid Systems Magnetic Tape Heads Office Equipment Printed Circuits Relays and Controls Semiconductor Assemblies Switches Telephone Equipment TV Tuners Typewriters/Keyboards