Everlube Ecoalube 642 is a thermally cured, MoS2 based solid film lubricant with a high molecular weight epoxy binder system. This coating provides excellent chemical resistance, wear life, abrasion resistance and performs best in higher load carrying applications.
Approvals/References/Specs
Honeywell Airesearch Specification: EMS 52402, Rev. M–T, Type XII Honeywell Airesearch Specification: FP-88, Type 03 Honeywell Allied Signal Specification: 91547-P6435G-P1 Amphenol Electronics Corp. Specification: 123-1008 Army Missile Command Specification: MIS-13107 Boeing Specification: BAC 5811N, Type VI, Cl. 3 Cessna Specification: CCM-19C, Type 4 Chrysler Corporation Specification: 2279897 Consolidated Controls Specification: S-2165 Controllex Eanco Specification: ED-49 Rev. A & B Fatigue Tech, Inc. Specification: FTI 8403C Ford Specification: ESA-M21P24-A1 General Dynamics-Space Systems Div. Specification: 0-06313 General Motors-Inland Div. Specification: M 1841 Gulfstream American Specification: 3306 Hughes Offshore Specification: 3221 Jet Avion Corporation Specification: JA474 thru Rev. B Litton Industries Specification: 893315, Rev. A (Type 45,46,47) Lockheed Martin Corporation-Aircraft Div. Specification: LCM 34-1254B (34.1402) Lockheed Martin Corporation-Aircraft Div. Specification: LCP 81-2064, Type II Lockheed Martin Corporation-Aircraft Div. Specification: LCP 81-2064D(Am.1), Type II (400°F Cure) Lockheed Martin Corporation-Aircraft Div. Specification: STP 62-005B, Type IV Boeing McDonnell Douglas Specification: DPM 388-10 US Military Specification: MIL-L-46010A US Military Specification: MIL-L-46010B, Type II, Amend 2 US Military Specification: MIL-L-46010C, Type II US Military Specification: MIL-L-46010D, Type II US Military Specification: MIL-L-46010E, Type II US Military Specification: MIS-13107 Minebea Specification: RP21809A Northrop Grumman Corporation Specification: L-7 Parker Hannifin Corporation Specification: BPS4528 Ty 8 Pratt & Whitney Canada Specification: CPW 428 F Raychem Corp. Specification: MEPS-6064 Rockwell Specification: LAO112-001, Type I, Cl. 3 Rohr Corporation Specification: RPS 13.81, Rev. P, Type 4 Textron Lycoming Engines Specification: P6435A thru H, -P1 (or Ty. I) Vickers Aero Hydraulics (Eaton Aero) Specification: VS 1-3-1-166 Weber Aircraft Specification: WPS-303, Rev. C, 3.3.1
- Excellent wear life
- Excellent chemical resistance
- Excellent abrasion resistance
- Ideal for higher load carrying applications
Typical Applications:- Bushings, shafts, splines and cams
- Slides, guides and rails
- Virtually all fasteners
- Threaded connectors and disconnects
Physical Properties- Lubricating Solid: MoS2
- Binder: High molecular weight epoxy
- Color and Appearance: Gray/Black matte finish
- Carrier: Solvent Borne
- Solids (by weight): 40% to 44%
- Density: 9.6 ± 0.5 lb/gal (1150 ± 60 grams/liter)
- Flash Point: 24°F (-4°C)
- Volatile Organic Compound: 695 grams/liter (5.8 lb/gal)
- Theoretical Coverage1: 540 ft²/gal @ 0.5 mils (13.2 m²/liter @ 12.7 microns)
- Alternative or Repair Coatings: A low VOC alternative coating for Ecoalube 642 is our Everlube 9002. For touch-up applications, Perma-Slik G or Lubri-Bond 220 works well with Ecoalube 642.
Safety Data Sheet