Av-Dec® TG8498-50 Gray 1:1 Thixoflex® Watertight Flexible Urethane Injectable Sealant - 50cc Cartridge

Features

• Provides a high level of tack to most substrates
• Ease of installation
• Ease of removal
• Leaves no residue when removed
• Polyurethane material
• Replaces moisture-retaining products around connectors
• Moisture barrier, corrosion protection, improved reliability, repair/scrap
• Low viscosity and cohesive properties assure proper sealing with 100% surface contact
• Reduction in: return-to-service time, troubleshooting time, labor cost, hanger time
• No solvents required, no scraping required, no paint adhesion issues
• Non-hazardous, no residue before, during, or after installation or removal
• Positive moisture barrier, easy removal from connector

• Color: Gray
• Reaction Ratio (by weight): 100:170.6 Resin to Hardener
• Reaction Ratio (by volume): 100 : 100
• Weight, Resin, lbs/gal at 25ºC (77ºF): 8.6 to 8.8
• Weight, Hardener, lbs/gal at 25ºC (77ºF): 7.9 to 8.1
• Viscosity, Resin, Cps at 25ºC (77ºF): 20,000 to 30, 000 (Thixotropic)
• Viscosity, Hardener, Cps at 25ºC (77ºF): 50,000 to 65,000 (Thixotropic)
• Gel Time at 25ºC (77ºF): < 7 minutes (100g mass)
• Working Life at 25ºC (77ºF): < 3 minutes (100g mass)
• Hardness, Shore at 25ºC (77ºF): “OO” 60 to 80
• Storage Temperature: Greater than 13ºC (55ºF)
• Shelf Life: 6 months (in original packaging)
• Test Data: 14 day alternate immersion test (ASTM-G44), no Degradation of Physical Properties, no corrosion evident in protected areas
• Solvent Resistance for MS52678 Polyurethane Sealant: ASTM D-543 (Water, Polypropylene Glycol/Water, Skydrol LD-4, MIL-H-5606, Jet A), no Degradation of Physical Properties
• Service Temperature Guide: -65ºC to 135ºC (-85ºF to 275ºF)
• Application Temperature: Greater than 13ºC (55ºF)

Downloads

 Safety Data Sheet