KGS Electronics LT-45 Reg Dc-Dc Power Converter - TSO

Our Part #: SGP123151
Manufacture Part #: LT-45
world wide icon INTERNATIONAL SHIPPING

SkyGeek welcomes international orders!

Please note: such orders are funneled into our NY warehouse and may take an extra 7-10 days to process. The benefit to this: You get one package shipped which reduces added taxes and duties that may be incurred from multiple shipments.

Approvals and Conformities

Approvals and Conformities

Product Attributes

Country of Origin
United States
Shipping Weight
1.2 pounds
ECCN
3A225
Color Family
Gold
Manufacturer P/N
LT-45
Schedule B Code
8504.90.0080
Pack Quantity
1
Color
Gold
The LT-45 is a pulse width-modulated DC to DC converter that provides regulated output power. This converter transforms an unregulated 28 VDC to regulated output power. The output voltage is adjusted via a remote control rheostat 5K ohm 1/2 W to ground. Fixed output and voltage control models are also available.

The LT-45 is primarily designed to control the light intensity of incandescent bulbs in aircraft lighting. The LT-45 are qualified to the FAA technical standards order (TSO-C71) for airborne static DC-DC electrical power converters.
  • State of the art design for regulation and positive logic for output overvoltage protection (PWM control topology).
  • The LT-45 is serviceable, small and lightweight.
  • Maximum output voltage is adjustable with an internal trim pot.
  • Designed to meet MIL-STD 704 Cat. B, MIL-STD-810C and MIL-STD-461A.
Output:
70 W

Input Voltage:
28 VDC nom., 22-36

Input Current:
@28 VDC 2.9 AMP

Input circuit breaker:
4-5 AMP

Output Voltage Regulated:
0-28 Variable and Regulated

Output current:
2.5 AMP

Output Ripple:
8 mVpp typ. @ 25°C,25 mVpp maximum.

Regulation:
2% for line, 2% load and 2% temperature

Efficiency:
83%

Output Control:
Adjustable with external 5k ohm,1/2 W linear pot (rheostat)

Mating plug:
MS3106E14S-5S

Receptacle:
MS3102A14S-5P

Protection (Overvoltage):
Output voltage is limited to approximately 125% even though remote control rheostat opens or shorts or certain types of internal failures occur.

Protection (Overload):
Output current limit when overload exceeds 125% of rating.
Protection (Reverse Polarity):
Input has reverse polarity diode in shunt to open 3 to 5 AMP. input C.B.and clip negative transients

Temperature & Altitude:
-50°C to +70°C @ mounting flange and at 55,000 ft.MIL-STD-810C Temperature and Altitude,Method 504.1, Proc 1, Cat 5.

Size:
1.6" H x 2.0" W x 5.0" L.
4.1 cm H x 5.1 cm W x 12.7 cm L

Weight:
0.6 lbs. (272 grams).

Compliance:
FAA TSO-C71

Product Attributes

Approvals and Conformities

Product Attributes

Country of Origin
United States
Shipping Weight
1.2 pounds
ECCN
3A225
Color Family
Gold
Manufacturer P/N
LT-45
Schedule B Code
8504.90.0080
Pack Quantity
1
Color
Gold
The LT-45 is a pulse width-modulated DC to DC converter that provides regulated output power. This converter transforms an unregulated 28 VDC to regulated output power. The output voltage is adjusted via a remote control rheostat 5K ohm 1/2 W to ground. Fixed output and voltage control models are also available.

The LT-45 is primarily designed to control the light intensity of incandescent bulbs in aircraft lighting. The LT-45 are qualified to the FAA technical standards order (TSO-C71) for airborne static DC-DC electrical power converters.
  • State of the art design for regulation and positive logic for output overvoltage protection (PWM control topology).
  • The LT-45 is serviceable, small and lightweight.
  • Maximum output voltage is adjustable with an internal trim pot.
  • Designed to meet MIL-STD 704 Cat. B, MIL-STD-810C and MIL-STD-461A.
Output:
70 W

Input Voltage:
28 VDC nom., 22-36

Input Current:
@28 VDC 2.9 AMP

Input circuit breaker:
4-5 AMP

Output Voltage Regulated:
0-28 Variable and Regulated

Output current:
2.5 AMP

Output Ripple:
8 mVpp typ. @ 25°C,25 mVpp maximum.

Regulation:
2% for line, 2% load and 2% temperature

Efficiency:
83%

Output Control:
Adjustable with external 5k ohm,1/2 W linear pot (rheostat)

Mating plug:
MS3106E14S-5S

Receptacle:
MS3102A14S-5P

Protection (Overvoltage):
Output voltage is limited to approximately 125% even though remote control rheostat opens or shorts or certain types of internal failures occur.

Protection (Overload):
Output current limit when overload exceeds 125% of rating.
Protection (Reverse Polarity):
Input has reverse polarity diode in shunt to open 3 to 5 AMP. input C.B.and clip negative transients

Temperature & Altitude:
-50°C to +70°C @ mounting flange and at 55,000 ft.MIL-STD-810C Temperature and Altitude,Method 504.1, Proc 1, Cat 5.

Size:
1.6" H x 2.0" W x 5.0" L.
4.1 cm H x 5.1 cm W x 12.7 cm L

Weight:
0.6 lbs. (272 grams).

Compliance:
FAA TSO-C71

Description

Approvals and Conformities

Product Attributes

Country of Origin
United States
Shipping Weight
1.2 pounds
ECCN
3A225
Color Family
Gold
Manufacturer P/N
LT-45
Schedule B Code
8504.90.0080
Pack Quantity
1
Color
Gold
The LT-45 is a pulse width-modulated DC to DC converter that provides regulated output power. This converter transforms an unregulated 28 VDC to regulated output power. The output voltage is adjusted via a remote control rheostat 5K ohm 1/2 W to ground. Fixed output and voltage control models are also available.

The LT-45 is primarily designed to control the light intensity of incandescent bulbs in aircraft lighting. The LT-45 are qualified to the FAA technical standards order (TSO-C71) for airborne static DC-DC electrical power converters.
  • State of the art design for regulation and positive logic for output overvoltage protection (PWM control topology).
  • The LT-45 is serviceable, small and lightweight.
  • Maximum output voltage is adjustable with an internal trim pot.
  • Designed to meet MIL-STD 704 Cat. B, MIL-STD-810C and MIL-STD-461A.
Output:
70 W

Input Voltage:
28 VDC nom., 22-36

Input Current:
@28 VDC 2.9 AMP

Input circuit breaker:
4-5 AMP

Output Voltage Regulated:
0-28 Variable and Regulated

Output current:
2.5 AMP

Output Ripple:
8 mVpp typ. @ 25°C,25 mVpp maximum.

Regulation:
2% for line, 2% load and 2% temperature

Efficiency:
83%

Output Control:
Adjustable with external 5k ohm,1/2 W linear pot (rheostat)

Mating plug:
MS3106E14S-5S

Receptacle:
MS3102A14S-5P

Protection (Overvoltage):
Output voltage is limited to approximately 125% even though remote control rheostat opens or shorts or certain types of internal failures occur.

Protection (Overload):
Output current limit when overload exceeds 125% of rating.
Protection (Reverse Polarity):
Input has reverse polarity diode in shunt to open 3 to 5 AMP. input C.B.and clip negative transients

Temperature & Altitude:
-50°C to +70°C @ mounting flange and at 55,000 ft.MIL-STD-810C Temperature and Altitude,Method 504.1, Proc 1, Cat 5.

Size:
1.6" H x 2.0" W x 5.0" L.
4.1 cm H x 5.1 cm W x 12.7 cm L

Weight:
0.6 lbs. (272 grams).

Compliance:
FAA TSO-C71

Approvals and Conformities

Approvals and Conformities

Product Attributes

Country of Origin
United States
Shipping Weight
1.2 pounds
ECCN
3A225
Color Family
Gold
Manufacturer P/N
LT-45
Schedule B Code
8504.90.0080
Pack Quantity
1
Color
Gold
The LT-45 is a pulse width-modulated DC to DC converter that provides regulated output power. This converter transforms an unregulated 28 VDC to regulated output power. The output voltage is adjusted via a remote control rheostat 5K ohm 1/2 W to ground. Fixed output and voltage control models are also available.

The LT-45 is primarily designed to control the light intensity of incandescent bulbs in aircraft lighting. The LT-45 are qualified to the FAA technical standards order (TSO-C71) for airborne static DC-DC electrical power converters.
  • State of the art design for regulation and positive logic for output overvoltage protection (PWM control topology).
  • The LT-45 is serviceable, small and lightweight.
  • Maximum output voltage is adjustable with an internal trim pot.
  • Designed to meet MIL-STD 704 Cat. B, MIL-STD-810C and MIL-STD-461A.
Output:
70 W

Input Voltage:
28 VDC nom., 22-36

Input Current:
@28 VDC 2.9 AMP

Input circuit breaker:
4-5 AMP

Output Voltage Regulated:
0-28 Variable and Regulated

Output current:
2.5 AMP

Output Ripple:
8 mVpp typ. @ 25°C,25 mVpp maximum.

Regulation:
2% for line, 2% load and 2% temperature

Efficiency:
83%

Output Control:
Adjustable with external 5k ohm,1/2 W linear pot (rheostat)

Mating plug:
MS3106E14S-5S

Receptacle:
MS3102A14S-5P

Protection (Overvoltage):
Output voltage is limited to approximately 125% even though remote control rheostat opens or shorts or certain types of internal failures occur.

Protection (Overload):
Output current limit when overload exceeds 125% of rating.
Protection (Reverse Polarity):
Input has reverse polarity diode in shunt to open 3 to 5 AMP. input C.B.and clip negative transients

Temperature & Altitude:
-50°C to +70°C @ mounting flange and at 55,000 ft.MIL-STD-810C Temperature and Altitude,Method 504.1, Proc 1, Cat 5.

Size:
1.6" H x 2.0" W x 5.0" L.
4.1 cm H x 5.1 cm W x 12.7 cm L

Weight:
0.6 lbs. (272 grams).

Compliance:
FAA TSO-C71

Product Attributes

Approvals and Conformities

Product Attributes

Country of Origin
United States
Shipping Weight
1.2 pounds
ECCN
3A225
Color Family
Gold
Manufacturer P/N
LT-45
Schedule B Code
8504.90.0080
Pack Quantity
1
Color
Gold
The LT-45 is a pulse width-modulated DC to DC converter that provides regulated output power. This converter transforms an unregulated 28 VDC to regulated output power. The output voltage is adjusted via a remote control rheostat 5K ohm 1/2 W to ground. Fixed output and voltage control models are also available.

The LT-45 is primarily designed to control the light intensity of incandescent bulbs in aircraft lighting. The LT-45 are qualified to the FAA technical standards order (TSO-C71) for airborne static DC-DC electrical power converters.
  • State of the art design for regulation and positive logic for output overvoltage protection (PWM control topology).
  • The LT-45 is serviceable, small and lightweight.
  • Maximum output voltage is adjustable with an internal trim pot.
  • Designed to meet MIL-STD 704 Cat. B, MIL-STD-810C and MIL-STD-461A.
Output:
70 W

Input Voltage:
28 VDC nom., 22-36

Input Current:
@28 VDC 2.9 AMP

Input circuit breaker:
4-5 AMP

Output Voltage Regulated:
0-28 Variable and Regulated

Output current:
2.5 AMP

Output Ripple:
8 mVpp typ. @ 25°C,25 mVpp maximum.

Regulation:
2% for line, 2% load and 2% temperature

Efficiency:
83%

Output Control:
Adjustable with external 5k ohm,1/2 W linear pot (rheostat)

Mating plug:
MS3106E14S-5S

Receptacle:
MS3102A14S-5P

Protection (Overvoltage):
Output voltage is limited to approximately 125% even though remote control rheostat opens or shorts or certain types of internal failures occur.

Protection (Overload):
Output current limit when overload exceeds 125% of rating.
Protection (Reverse Polarity):
Input has reverse polarity diode in shunt to open 3 to 5 AMP. input C.B.and clip negative transients

Temperature & Altitude:
-50°C to +70°C @ mounting flange and at 55,000 ft.MIL-STD-810C Temperature and Altitude,Method 504.1, Proc 1, Cat 5.

Size:
1.6" H x 2.0" W x 5.0" L.
4.1 cm H x 5.1 cm W x 12.7 cm L

Weight:
0.6 lbs. (272 grams).

Compliance:
FAA TSO-C71

Description

Approvals and Conformities

Product Attributes

Country of Origin
United States
Shipping Weight
1.2 pounds
ECCN
3A225
Color Family
Gold
Manufacturer P/N
LT-45
Schedule B Code
8504.90.0080
Pack Quantity
1
Color
Gold
The LT-45 is a pulse width-modulated DC to DC converter that provides regulated output power. This converter transforms an unregulated 28 VDC to regulated output power. The output voltage is adjusted via a remote control rheostat 5K ohm 1/2 W to ground. Fixed output and voltage control models are also available.

The LT-45 is primarily designed to control the light intensity of incandescent bulbs in aircraft lighting. The LT-45 are qualified to the FAA technical standards order (TSO-C71) for airborne static DC-DC electrical power converters.
  • State of the art design for regulation and positive logic for output overvoltage protection (PWM control topology).
  • The LT-45 is serviceable, small and lightweight.
  • Maximum output voltage is adjustable with an internal trim pot.
  • Designed to meet MIL-STD 704 Cat. B, MIL-STD-810C and MIL-STD-461A.
Output:
70 W

Input Voltage:
28 VDC nom., 22-36

Input Current:
@28 VDC 2.9 AMP

Input circuit breaker:
4-5 AMP

Output Voltage Regulated:
0-28 Variable and Regulated

Output current:
2.5 AMP

Output Ripple:
8 mVpp typ. @ 25°C,25 mVpp maximum.

Regulation:
2% for line, 2% load and 2% temperature

Efficiency:
83%

Output Control:
Adjustable with external 5k ohm,1/2 W linear pot (rheostat)

Mating plug:
MS3106E14S-5S

Receptacle:
MS3102A14S-5P

Protection (Overvoltage):
Output voltage is limited to approximately 125% even though remote control rheostat opens or shorts or certain types of internal failures occur.

Protection (Overload):
Output current limit when overload exceeds 125% of rating.
Protection (Reverse Polarity):
Input has reverse polarity diode in shunt to open 3 to 5 AMP. input C.B.and clip negative transients

Temperature & Altitude:
-50°C to +70°C @ mounting flange and at 55,000 ft.MIL-STD-810C Temperature and Altitude,Method 504.1, Proc 1, Cat 5.

Size:
1.6" H x 2.0" W x 5.0" L.
4.1 cm H x 5.1 cm W x 12.7 cm L

Weight:
0.6 lbs. (272 grams).

Compliance:
FAA TSO-C71