Airwolf AFC-K007-F Universal Lycoming (engines with existing rear accessory case filters) Remote Mount Oil Filter Kit

Our Part #: SGP88250
Manufacture Part #: AFC-K007-F
Our Price: $666.67 (Kit)
INTERNATIONAL SHIPPING

SkyGeek welcomes international orders!

Please note: such orders are funneled into our NY warehouse and may take an extra 7-10 days to process. The benefit to this: You get one package shipped which reduces added taxes and duties that may be incurred from multiple shipments.

Description

For engines with existing oil filter on rear of accessory case. Lycoming powered Single and Multi Engine Fixed Wing Aircraft less than 450hp. having firewalls of .021 ASTM A527 galvanized steel or equivalent. Drawing: AFC-K007. Revision: A. Date: 10/01/02. STC # (SA00024NY)

The Airwolf Remote Mount Filter Kit is conveniently installed at the upper right-hand corner of the firewall, right behind the oil cooler. It is out of sight, but easy to get to and service. Oil changes will now take just 20 minutes, with no mess. The Airwolf Adaptor replaces the original oil screen, putting an end to the difficult job of cleaning the screen every 25 hours. In fact, with our filter kit, Lycoming allows you to extend your oil change intervals from 25 hours to 50 hours.

Our new stainless steel hoses replace the existing hard line oil cooler lines. All helicopter kits include TSO'd hoses.

Located directly ahead of the oil cooler, the filter prevents your oil cooler from becoming a "trash collector."

  • Full Flow
  • Easy To Install
  • Extends Engine Life
  • Drops oil temps 20°
  • Total Weight under 5 lbs.
  • Extend oil changes to 50hrs.
  • FAA / PMA Approved
  • Ends messy oil changes.
  • Change your oil in minutes instead of hours.
  • Protects your $11,000 fan shaft pinion gear.
Lycoming Engines
STC'd for ALL aircraft powered by O-235 through IO-720 Lycoming Engines. Perfect for tight installations in ALL aircraft manufactured by:
  • Aviat Husky
  • Beech
  • Bellanca
  • Cessna
  • Grumman
  • Excalibur
  • Maule
  • Mooney
  • Piper
  • Pitts
  • Taylorcraft
  • And many others.
Typical kit weighs less than 5 pounds. The oil filter is conveniently mounted on the firewall, right-side up, where it makes oil changes a simple, no mess process. All AIRWOLF kits mount to your existing accessory case. Our lightweight 4 ounce adapter replaces outdated oil screens. Your Vernatherm and Oil Temperature Probe transfer into our adapter.

Continental Engines
STC'd for ALL aircraft powered by A50 through IO550 Continental Engines. Perfect for tight installations in ALL aircraft manufactured by:

  • Aeronca
  • Aircoupe
  • Beech
  • Bellanca
  • Cessna
  • Luscombe
  • Maule
  • Meyer
  • Mooney
  • Navion
  • Piper
  • Twin Commander
  • And many others

  • P/N AFC-K008-A fits A50, A65, A75
  • P/N AFC-K008-A fits C75, C85, C90, C125, O-200
  • P/N AFC-K008-B fits C145, O300, GO300, IO360
  • P/N AFC-K008-C fits O470, IO470, IO520, TSIO520, GTS10520
  • P/N AFC-K008-E fits E-165, E-185, E-205, E-225

    Franklin Engines
    Our kits are designed to be installed on Stinson, Maule, Hiller, Bell 47, Republic, and Bellanca Aircraft with Franklin Engines. Bell, Hiller, Enstrom, Robinson, Hughes, Schweizer Engines, Flight Schools, Police Departments, Power Line Patrols, and Private Owners. You owe it to yourself and your helicopter to install the Remote Mounted oil filters by Airwolf Filter Corp.

  • Product Attributes

    Country of Origin
    United States
    Shipping Weight
    5 pounds
    UOM
    Kit
    Manufacturer P/N
    AFC-K007-F  
    Pack Quantity
    1

    Other Part Numbers

    Index Part Number Description Quantity
    01a. LYC-10 Full Flow Engine Adapter, All O235-540 except below (1)
    01b. LYC-11 Full Flow Engine Adapter, IO720 (1)
    01c. OFB-12 Full Flow Engine Adapter, Single Drive Dual Mags [Old Style] (1)
    01d. OFB-17 Full Flow Engine Adapter,Single Drive Dual Mags [New Style] (1)
    01e. M83248/1-230 "O" Ring, Viton, Single Drive Dual Mags [New Style] (1)
    01f. AN919-15D-SP Fitting, Reducer, -10 -> -8 Single Drive Dual Mags [New Style] (2)
    02a. 61173 Adapter Base Gasket, O235-540 (1)
    02b. 12777 Adapter Base Gasket, IO720 (1)
    02c. 12776 Adapter Base Gasket, IO720 (1)
    03a. PLT-28775 Adapter Plate, IO720 (1)
    03b. PLT-12999 Restrictor Plate, O235 (1)
    04a. AN837-8D Bulkhead Fitting-45°, O235-540 (2)
    04b. AN833-8D Bulkhead Fitting-90°, O235-540 (Opt)
    04c. AN815-8D Union, O235-540 (Opt)
    05a. AN837-10D Bulkhead Fitting-45°, IO720 (2)
    05b. AN833-10D Bulkhead Fitting-90°, IO720 (Opt)
    05c. AN815-10D Union, IO720 (Opt)
    06a. AN6289-8D Bulkhead Nut, O235-540 (2)
    06b. AN6289-10D Bulkhead Nut, IO720 (2)
    07a. MS28773-08 Boss Gasket, Teflon, O235-540 (2)
    07b. MS28773-10 Boss Gasket, Teflon, IO720 (2)
    08a. MS9387-08 “O” Rings, Viton, O235-540 (2)
    08b. MS9387-10 “O” Rings, Viton, IO720 (2)
    09. MS35769-11 Gasket, Oil Temperature Sensor (1)
    10. MS35769-21 Gasket, Thermostatic Valve (1)
    11. AN4H-4A Bolts, Drilled Head (4)
    12a. OFM-10 Horizontal Oil Filter Mount Plate (1)
    12b. OFM-11 Vertical Oil Filter Mount Plate (1)
    13a. OFB-10 Oil Filter Base, -8 Ports, O235-540 (1)
    13b. OFB-11 Oil Filter Base, -10 Ports, IO720 (1)
    13c. OFB-15 Oil Filter Base, -12 Ports, GO/GSO/IGSO 435/480/540 (1)
    14a. MS20822-8D 90° Fitting, O235-540 (1)
    14b. MS20822-10D 90° Fitting, IO720 (1)
    14c. MS20822-12D 90° Fitting, GO/GSO/IGSO 435/480/540 (1)
    14d. AN842-16D 90° Fitting, W670 (1)
    15a. MS20823-8D 45° Fitting, O235-540 (1)
    15b. MS20823-10D 45° Fitting, IO720 (1)
    15c. MS20823-12D 45° Fitting, GO/GSO/IGSO 435/480/540 (1)
    15d. AN844-16D 45° Fitting, W670 (1)
    16a. AN816-8D Nipple, Flared Tube, O235-540 (Opt)
    16b. AN816-10D Nipple, Flared Tube, IO720 (Opt)
    16c. AN816-12D Nipple, Flared Tube, GO/GSO/IGSO 435/480/540 (Opt)
    16d. AN840-16D Nipple, W670 (Opt)
    17. OFS-10 Oil Filter Stud (1)
    18a. AFC-500 Oil Filter, Std. or Equivalent [Champion CH48108] (1)
    18b. AFC-600 Oil Filter, Long or Equivalent [Champion CH48109] 1
    19a. F13000008-0xxz Titeflex® Firesleeved Teflon Hose, [-8], O235-540 (Opt)
    19b. F13000010-0xxz Titeflex® Firesleeved Teflon Hose, [-10], IO720 (Opt)
    19c. F13000012-0xxz Titeflex® Firesleeved Teflon Hose, [-12], GO/GSO/IGSO 435/480/540 (Opt)
    20a. AE7010000H0xxz Aeroquip® Hose Assy, [-8], O235-540 (Opt)
    20b. AE7010000J0xxz Aeroquip® Hose Assy, [-10], IO720 (Opt)
    20c. AE7010000K0xxz Aeroquip® Hose Assy, [-12], IGO/GSO/IGSO 435/480/540 (Opt)
    20d. MIL6000-1-25 MIL 6000 Hose, 25" Long, [Stearman] (2)
    20e. MIL6000-3/4-25 MIL 6000 Hose, 25" Long, [Waco] (2)
    21. AN4-5A Bolts (6)
    22. AN960-416 Flat Washers (16)
    23. MS20365-428A Locknuts (6)
    24. DBL-10 Doubler Plate (1)
    25. OTA-527 Oil Temp Adapter (Opt)
    26. CAP-1350 Bypass Valve Cap (Opt)
    27. LYC-12 Full Flow Engine Adapter-Engine Mounted (1)
    28. PLT-200 2" Adapter Plate (1)
    29. AN74A-6 Drilled Head Bolts (4)
    30. MS35333-40 1/4" Star Washer (8)
    31. 56707 Loctite® 567 PST Teflon Thread Sealant (1)
    32. AFC-K007-II Installation Instructions, Generic (1)
    33. AFC-K007-MI Instructions for Continued Airworthiness (1)
    34. AFC-K007-PL Parts List (1)

    Product Details

    For engines with existing oil filter on rear of accessory case. Lycoming powered Single and Multi Engine Fixed Wing Aircraft less than 450hp. having firewalls of .021 ASTM A527 galvanized steel or equivalent. Drawing: AFC-K007. Revision: A. Date: 10/01/02. STC # (SA00024NY)

    The Airwolf Remote Mount Filter Kit is conveniently installed at the upper right-hand corner of the firewall, right behind the oil cooler. It is out of sight, but easy to get to and service. Oil changes will now take just 20 minutes, with no mess. The Airwolf Adaptor replaces the original oil screen, putting an end to the difficult job of cleaning the screen every 25 hours. In fact, with our filter kit, Lycoming allows you to extend your oil change intervals from 25 hours to 50 hours.

    Our new stainless steel hoses replace the existing hard line oil cooler lines. All helicopter kits include TSO'd hoses.

    Located directly ahead of the oil cooler, the filter prevents your oil cooler from becoming a "trash collector."

    • Full Flow
    • Easy To Install
    • Extends Engine Life
    • Drops oil temps 20°
    • Total Weight under 5 lbs.
    • Extend oil changes to 50hrs.
    • FAA / PMA Approved
    • Ends messy oil changes.
    • Change your oil in minutes instead of hours.
    • Protects your $11,000 fan shaft pinion gear.
    Lycoming Engines
    STC'd for ALL aircraft powered by O-235 through IO-720 Lycoming Engines. Perfect for tight installations in ALL aircraft manufactured by:
    • Aviat Husky
    • Beech
    • Bellanca
    • Cessna
    • Grumman
    • Excalibur
    • Maule
    • Mooney
    • Piper
    • Pitts
    • Taylorcraft
    • And many others.
    Typical kit weighs less than 5 pounds. The oil filter is conveniently mounted on the firewall, right-side up, where it makes oil changes a simple, no mess process. All AIRWOLF kits mount to your existing accessory case. Our lightweight 4 ounce adapter replaces outdated oil screens. Your Vernatherm and Oil Temperature Probe transfer into our adapter.

    Continental Engines
    STC'd for ALL aircraft powered by A50 through IO550 Continental Engines. Perfect for tight installations in ALL aircraft manufactured by:

    • Aeronca
    • Aircoupe
    • Beech
    • Bellanca
    • Cessna
    • Luscombe
    • Maule
    • Meyer
    • Mooney
    • Navion
    • Piper
    • Twin Commander
    • And many others

  • P/N AFC-K008-A fits A50, A65, A75
  • P/N AFC-K008-A fits C75, C85, C90, C125, O-200
  • P/N AFC-K008-B fits C145, O300, GO300, IO360
  • P/N AFC-K008-C fits O470, IO470, IO520, TSIO520, GTS10520
  • P/N AFC-K008-E fits E-165, E-185, E-205, E-225

    Franklin Engines
    Our kits are designed to be installed on Stinson, Maule, Hiller, Bell 47, Republic, and Bellanca Aircraft with Franklin Engines. Bell, Hiller, Enstrom, Robinson, Hughes, Schweizer Engines, Flight Schools, Police Departments, Power Line Patrols, and Private Owners. You owe it to yourself and your helicopter to install the Remote Mounted oil filters by Airwolf Filter Corp.

  • Product Attributes

    Country of Origin
    United States
    Shipping Weight
    5 pounds
    UOM
    Kit
    Manufacturer P/N
    AFC-K007-F  
    Pack Quantity
    1

    Other Part Numbers

    Index Part Number Description Quantity
    01a. LYC-10 Full Flow Engine Adapter, All O235-540 except below (1)
    01b. LYC-11 Full Flow Engine Adapter, IO720 (1)
    01c. OFB-12 Full Flow Engine Adapter, Single Drive Dual Mags [Old Style] (1)
    01d. OFB-17 Full Flow Engine Adapter,Single Drive Dual Mags [New Style] (1)
    01e. M83248/1-230 "O" Ring, Viton, Single Drive Dual Mags [New Style] (1)
    01f. AN919-15D-SP Fitting, Reducer, -10 -> -8 Single Drive Dual Mags [New Style] (2)
    02a. 61173 Adapter Base Gasket, O235-540 (1)
    02b. 12777 Adapter Base Gasket, IO720 (1)
    02c. 12776 Adapter Base Gasket, IO720 (1)
    03a. PLT-28775 Adapter Plate, IO720 (1)
    03b. PLT-12999 Restrictor Plate, O235 (1)
    04a. AN837-8D Bulkhead Fitting-45°, O235-540 (2)
    04b. AN833-8D Bulkhead Fitting-90°, O235-540 (Opt)
    04c. AN815-8D Union, O235-540 (Opt)
    05a. AN837-10D Bulkhead Fitting-45°, IO720 (2)
    05b. AN833-10D Bulkhead Fitting-90°, IO720 (Opt)
    05c. AN815-10D Union, IO720 (Opt)
    06a. AN6289-8D Bulkhead Nut, O235-540 (2)
    06b. AN6289-10D Bulkhead Nut, IO720 (2)
    07a. MS28773-08 Boss Gasket, Teflon, O235-540 (2)
    07b. MS28773-10 Boss Gasket, Teflon, IO720 (2)
    08a. MS9387-08 “O” Rings, Viton, O235-540 (2)
    08b. MS9387-10 “O” Rings, Viton, IO720 (2)
    09. MS35769-11 Gasket, Oil Temperature Sensor (1)
    10. MS35769-21 Gasket, Thermostatic Valve (1)
    11. AN4H-4A Bolts, Drilled Head (4)
    12a. OFM-10 Horizontal Oil Filter Mount Plate (1)
    12b. OFM-11 Vertical Oil Filter Mount Plate (1)
    13a. OFB-10 Oil Filter Base, -8 Ports, O235-540 (1)
    13b. OFB-11 Oil Filter Base, -10 Ports, IO720 (1)
    13c. OFB-15 Oil Filter Base, -12 Ports, GO/GSO/IGSO 435/480/540 (1)
    14a. MS20822-8D 90° Fitting, O235-540 (1)
    14b. MS20822-10D 90° Fitting, IO720 (1)
    14c. MS20822-12D 90° Fitting, GO/GSO/IGSO 435/480/540 (1)
    14d. AN842-16D 90° Fitting, W670 (1)
    15a. MS20823-8D 45° Fitting, O235-540 (1)
    15b. MS20823-10D 45° Fitting, IO720 (1)
    15c. MS20823-12D 45° Fitting, GO/GSO/IGSO 435/480/540 (1)
    15d. AN844-16D 45° Fitting, W670 (1)
    16a. AN816-8D Nipple, Flared Tube, O235-540 (Opt)
    16b. AN816-10D Nipple, Flared Tube, IO720 (Opt)
    16c. AN816-12D Nipple, Flared Tube, GO/GSO/IGSO 435/480/540 (Opt)
    16d. AN840-16D Nipple, W670 (Opt)
    17. OFS-10 Oil Filter Stud (1)
    18a. AFC-500 Oil Filter, Std. or Equivalent [Champion CH48108] (1)
    18b. AFC-600 Oil Filter, Long or Equivalent [Champion CH48109] 1
    19a. F13000008-0xxz Titeflex® Firesleeved Teflon Hose, [-8], O235-540 (Opt)
    19b. F13000010-0xxz Titeflex® Firesleeved Teflon Hose, [-10], IO720 (Opt)
    19c. F13000012-0xxz Titeflex® Firesleeved Teflon Hose, [-12], GO/GSO/IGSO 435/480/540 (Opt)
    20a. AE7010000H0xxz Aeroquip® Hose Assy, [-8], O235-540 (Opt)
    20b. AE7010000J0xxz Aeroquip® Hose Assy, [-10], IO720 (Opt)
    20c. AE7010000K0xxz Aeroquip® Hose Assy, [-12], IGO/GSO/IGSO 435/480/540 (Opt)
    20d. MIL6000-1-25 MIL 6000 Hose, 25" Long, [Stearman] (2)
    20e. MIL6000-3/4-25 MIL 6000 Hose, 25" Long, [Waco] (2)
    21. AN4-5A Bolts (6)
    22. AN960-416 Flat Washers (16)
    23. MS20365-428A Locknuts (6)
    24. DBL-10 Doubler Plate (1)
    25. OTA-527 Oil Temp Adapter (Opt)
    26. CAP-1350 Bypass Valve Cap (Opt)
    27. LYC-12 Full Flow Engine Adapter-Engine Mounted (1)
    28. PLT-200 2" Adapter Plate (1)
    29. AN74A-6 Drilled Head Bolts (4)
    30. MS35333-40 1/4" Star Washer (8)
    31. 56707 Loctite® 567 PST Teflon Thread Sealant (1)
    32. AFC-K007-II Installation Instructions, Generic (1)
    33. AFC-K007-MI Instructions for Continued Airworthiness (1)
    34. AFC-K007-PL Parts List (1)

    Downloads

    For engines with existing oil filter on rear of accessory case. Lycoming powered Single and Multi Engine Fixed Wing Aircraft less than 450hp. having firewalls of .021 ASTM A527 galvanized steel or equivalent. Drawing: AFC-K007. Revision: A. Date: 10/01/02. STC # (SA00024NY)

    The Airwolf Remote Mount Filter Kit is conveniently installed at the upper right-hand corner of the firewall, right behind the oil cooler. It is out of sight, but easy to get to and service. Oil changes will now take just 20 minutes, with no mess. The Airwolf Adaptor replaces the original oil screen, putting an end to the difficult job of cleaning the screen every 25 hours. In fact, with our filter kit, Lycoming allows you to extend your oil change intervals from 25 hours to 50 hours.

    Our new stainless steel hoses replace the existing hard line oil cooler lines. All helicopter kits include TSO'd hoses.

    Located directly ahead of the oil cooler, the filter prevents your oil cooler from becoming a "trash collector."

    • Full Flow
    • Easy To Install
    • Extends Engine Life
    • Drops oil temps 20°
    • Total Weight under 5 lbs.
    • Extend oil changes to 50hrs.
    • FAA / PMA Approved
    • Ends messy oil changes.
    • Change your oil in minutes instead of hours.
    • Protects your $11,000 fan shaft pinion gear.
    Lycoming Engines
    STC'd for ALL aircraft powered by O-235 through IO-720 Lycoming Engines. Perfect for tight installations in ALL aircraft manufactured by:
    • Aviat Husky
    • Beech
    • Bellanca
    • Cessna
    • Grumman
    • Excalibur
    • Maule
    • Mooney
    • Piper
    • Pitts
    • Taylorcraft
    • And many others.
    Typical kit weighs less than 5 pounds. The oil filter is conveniently mounted on the firewall, right-side up, where it makes oil changes a simple, no mess process. All AIRWOLF kits mount to your existing accessory case. Our lightweight 4 ounce adapter replaces outdated oil screens. Your Vernatherm and Oil Temperature Probe transfer into our adapter.

    Continental Engines
    STC'd for ALL aircraft powered by A50 through IO550 Continental Engines. Perfect for tight installations in ALL aircraft manufactured by:

    • Aeronca
    • Aircoupe
    • Beech
    • Bellanca
    • Cessna
    • Luscombe
    • Maule
    • Meyer
    • Mooney
    • Navion
    • Piper
    • Twin Commander
    • And many others

  • P/N AFC-K008-A fits A50, A65, A75
  • P/N AFC-K008-A fits C75, C85, C90, C125, O-200
  • P/N AFC-K008-B fits C145, O300, GO300, IO360
  • P/N AFC-K008-C fits O470, IO470, IO520, TSIO520, GTS10520
  • P/N AFC-K008-E fits E-165, E-185, E-205, E-225

    Franklin Engines
    Our kits are designed to be installed on Stinson, Maule, Hiller, Bell 47, Republic, and Bellanca Aircraft with Franklin Engines. Bell, Hiller, Enstrom, Robinson, Hughes, Schweizer Engines, Flight Schools, Police Departments, Power Line Patrols, and Private Owners. You owe it to yourself and your helicopter to install the Remote Mounted oil filters by Airwolf Filter Corp.

  • Product Attributes

    Country of Origin
    United States
    Shipping Weight
    5 pounds
    UOM
    Kit
    Manufacturer P/N
    AFC-K007-F  
    Pack Quantity
    1

    Other Part Numbers

    Index Part Number Description Quantity
    01a. LYC-10 Full Flow Engine Adapter, All O235-540 except below (1)
    01b. LYC-11 Full Flow Engine Adapter, IO720 (1)
    01c. OFB-12 Full Flow Engine Adapter, Single Drive Dual Mags [Old Style] (1)
    01d. OFB-17 Full Flow Engine Adapter,Single Drive Dual Mags [New Style] (1)
    01e. M83248/1-230 "O" Ring, Viton, Single Drive Dual Mags [New Style] (1)
    01f. AN919-15D-SP Fitting, Reducer, -10 -> -8 Single Drive Dual Mags [New Style] (2)
    02a. 61173 Adapter Base Gasket, O235-540 (1)
    02b. 12777 Adapter Base Gasket, IO720 (1)
    02c. 12776 Adapter Base Gasket, IO720 (1)
    03a. PLT-28775 Adapter Plate, IO720 (1)
    03b. PLT-12999 Restrictor Plate, O235 (1)
    04a. AN837-8D Bulkhead Fitting-45°, O235-540 (2)
    04b. AN833-8D Bulkhead Fitting-90°, O235-540 (Opt)
    04c. AN815-8D Union, O235-540 (Opt)
    05a. AN837-10D Bulkhead Fitting-45°, IO720 (2)
    05b. AN833-10D Bulkhead Fitting-90°, IO720 (Opt)
    05c. AN815-10D Union, IO720 (Opt)
    06a. AN6289-8D Bulkhead Nut, O235-540 (2)
    06b. AN6289-10D Bulkhead Nut, IO720 (2)
    07a. MS28773-08 Boss Gasket, Teflon, O235-540 (2)
    07b. MS28773-10 Boss Gasket, Teflon, IO720 (2)
    08a. MS9387-08 “O” Rings, Viton, O235-540 (2)
    08b. MS9387-10 “O” Rings, Viton, IO720 (2)
    09. MS35769-11 Gasket, Oil Temperature Sensor (1)
    10. MS35769-21 Gasket, Thermostatic Valve (1)
    11. AN4H-4A Bolts, Drilled Head (4)
    12a. OFM-10 Horizontal Oil Filter Mount Plate (1)
    12b. OFM-11 Vertical Oil Filter Mount Plate (1)
    13a. OFB-10 Oil Filter Base, -8 Ports, O235-540 (1)
    13b. OFB-11 Oil Filter Base, -10 Ports, IO720 (1)
    13c. OFB-15 Oil Filter Base, -12 Ports, GO/GSO/IGSO 435/480/540 (1)
    14a. MS20822-8D 90° Fitting, O235-540 (1)
    14b. MS20822-10D 90° Fitting, IO720 (1)
    14c. MS20822-12D 90° Fitting, GO/GSO/IGSO 435/480/540 (1)
    14d. AN842-16D 90° Fitting, W670 (1)
    15a. MS20823-8D 45° Fitting, O235-540 (1)
    15b. MS20823-10D 45° Fitting, IO720 (1)
    15c. MS20823-12D 45° Fitting, GO/GSO/IGSO 435/480/540 (1)
    15d. AN844-16D 45° Fitting, W670 (1)
    16a. AN816-8D Nipple, Flared Tube, O235-540 (Opt)
    16b. AN816-10D Nipple, Flared Tube, IO720 (Opt)
    16c. AN816-12D Nipple, Flared Tube, GO/GSO/IGSO 435/480/540 (Opt)
    16d. AN840-16D Nipple, W670 (Opt)
    17. OFS-10 Oil Filter Stud (1)
    18a. AFC-500 Oil Filter, Std. or Equivalent [Champion CH48108] (1)
    18b. AFC-600 Oil Filter, Long or Equivalent [Champion CH48109] 1
    19a. F13000008-0xxz Titeflex® Firesleeved Teflon Hose, [-8], O235-540 (Opt)
    19b. F13000010-0xxz Titeflex® Firesleeved Teflon Hose, [-10], IO720 (Opt)
    19c. F13000012-0xxz Titeflex® Firesleeved Teflon Hose, [-12], GO/GSO/IGSO 435/480/540 (Opt)
    20a. AE7010000H0xxz Aeroquip® Hose Assy, [-8], O235-540 (Opt)
    20b. AE7010000J0xxz Aeroquip® Hose Assy, [-10], IO720 (Opt)
    20c. AE7010000K0xxz Aeroquip® Hose Assy, [-12], IGO/GSO/IGSO 435/480/540 (Opt)
    20d. MIL6000-1-25 MIL 6000 Hose, 25" Long, [Stearman] (2)
    20e. MIL6000-3/4-25 MIL 6000 Hose, 25" Long, [Waco] (2)
    21. AN4-5A Bolts (6)
    22. AN960-416 Flat Washers (16)
    23. MS20365-428A Locknuts (6)
    24. DBL-10 Doubler Plate (1)
    25. OTA-527 Oil Temp Adapter (Opt)
    26. CAP-1350 Bypass Valve Cap (Opt)
    27. LYC-12 Full Flow Engine Adapter-Engine Mounted (1)
    28. PLT-200 2" Adapter Plate (1)
    29. AN74A-6 Drilled Head Bolts (4)
    30. MS35333-40 1/4" Star Washer (8)
    31. 56707 Loctite® 567 PST Teflon Thread Sealant (1)
    32. AFC-K007-II Installation Instructions, Generic (1)
    33. AFC-K007-MI Instructions for Continued Airworthiness (1)
    34. AFC-K007-PL Parts List (1)

    Description

    For engines with existing oil filter on rear of accessory case. Lycoming powered Single and Multi Engine Fixed Wing Aircraft less than 450hp. having firewalls of .021 ASTM A527 galvanized steel or equivalent. Drawing: AFC-K007. Revision: A. Date: 10/01/02. STC # (SA00024NY)

    The Airwolf Remote Mount Filter Kit is conveniently installed at the upper right-hand corner of the firewall, right behind the oil cooler. It is out of sight, but easy to get to and service. Oil changes will now take just 20 minutes, with no mess. The Airwolf Adaptor replaces the original oil screen, putting an end to the difficult job of cleaning the screen every 25 hours. In fact, with our filter kit, Lycoming allows you to extend your oil change intervals from 25 hours to 50 hours.

    Our new stainless steel hoses replace the existing hard line oil cooler lines. All helicopter kits include TSO'd hoses.

    Located directly ahead of the oil cooler, the filter prevents your oil cooler from becoming a "trash collector."

    • Full Flow
    • Easy To Install
    • Extends Engine Life
    • Drops oil temps 20°
    • Total Weight under 5 lbs.
    • Extend oil changes to 50hrs.
    • FAA / PMA Approved
    • Ends messy oil changes.
    • Change your oil in minutes instead of hours.
    • Protects your $11,000 fan shaft pinion gear.
    Lycoming Engines
    STC'd for ALL aircraft powered by O-235 through IO-720 Lycoming Engines. Perfect for tight installations in ALL aircraft manufactured by:
    • Aviat Husky
    • Beech
    • Bellanca
    • Cessna
    • Grumman
    • Excalibur
    • Maule
    • Mooney
    • Piper
    • Pitts
    • Taylorcraft
    • And many others.
    Typical kit weighs less than 5 pounds. The oil filter is conveniently mounted on the firewall, right-side up, where it makes oil changes a simple, no mess process. All AIRWOLF kits mount to your existing accessory case. Our lightweight 4 ounce adapter replaces outdated oil screens. Your Vernatherm and Oil Temperature Probe transfer into our adapter.

    Continental Engines
    STC'd for ALL aircraft powered by A50 through IO550 Continental Engines. Perfect for tight installations in ALL aircraft manufactured by:

    • Aeronca
    • Aircoupe
    • Beech
    • Bellanca
    • Cessna
    • Luscombe
    • Maule
    • Meyer
    • Mooney
    • Navion
    • Piper
    • Twin Commander
    • And many others

  • P/N AFC-K008-A fits A50, A65, A75
  • P/N AFC-K008-A fits C75, C85, C90, C125, O-200
  • P/N AFC-K008-B fits C145, O300, GO300, IO360
  • P/N AFC-K008-C fits O470, IO470, IO520, TSIO520, GTS10520
  • P/N AFC-K008-E fits E-165, E-185, E-205, E-225

    Franklin Engines
    Our kits are designed to be installed on Stinson, Maule, Hiller, Bell 47, Republic, and Bellanca Aircraft with Franklin Engines. Bell, Hiller, Enstrom, Robinson, Hughes, Schweizer Engines, Flight Schools, Police Departments, Power Line Patrols, and Private Owners. You owe it to yourself and your helicopter to install the Remote Mounted oil filters by Airwolf Filter Corp.

  • Product Attributes

    Country of Origin
    United States
    Shipping Weight
    5 pounds
    UOM
    Kit
    Manufacturer P/N
    AFC-K007-F  
    Pack Quantity
    1

    Other Part Numbers

    Index Part Number Description Quantity
    01a. LYC-10 Full Flow Engine Adapter, All O235-540 except below (1)
    01b. LYC-11 Full Flow Engine Adapter, IO720 (1)
    01c. OFB-12 Full Flow Engine Adapter, Single Drive Dual Mags [Old Style] (1)
    01d. OFB-17 Full Flow Engine Adapter,Single Drive Dual Mags [New Style] (1)
    01e. M83248/1-230 "O" Ring, Viton, Single Drive Dual Mags [New Style] (1)
    01f. AN919-15D-SP Fitting, Reducer, -10 -> -8 Single Drive Dual Mags [New Style] (2)
    02a. 61173 Adapter Base Gasket, O235-540 (1)
    02b. 12777 Adapter Base Gasket, IO720 (1)
    02c. 12776 Adapter Base Gasket, IO720 (1)
    03a. PLT-28775 Adapter Plate, IO720 (1)
    03b. PLT-12999 Restrictor Plate, O235 (1)
    04a. AN837-8D Bulkhead Fitting-45°, O235-540 (2)
    04b. AN833-8D Bulkhead Fitting-90°, O235-540 (Opt)
    04c. AN815-8D Union, O235-540 (Opt)
    05a. AN837-10D Bulkhead Fitting-45°, IO720 (2)
    05b. AN833-10D Bulkhead Fitting-90°, IO720 (Opt)
    05c. AN815-10D Union, IO720 (Opt)
    06a. AN6289-8D Bulkhead Nut, O235-540 (2)
    06b. AN6289-10D Bulkhead Nut, IO720 (2)
    07a. MS28773-08 Boss Gasket, Teflon, O235-540 (2)
    07b. MS28773-10 Boss Gasket, Teflon, IO720 (2)
    08a. MS9387-08 “O” Rings, Viton, O235-540 (2)
    08b. MS9387-10 “O” Rings, Viton, IO720 (2)
    09. MS35769-11 Gasket, Oil Temperature Sensor (1)
    10. MS35769-21 Gasket, Thermostatic Valve (1)
    11. AN4H-4A Bolts, Drilled Head (4)
    12a. OFM-10 Horizontal Oil Filter Mount Plate (1)
    12b. OFM-11 Vertical Oil Filter Mount Plate (1)
    13a. OFB-10 Oil Filter Base, -8 Ports, O235-540 (1)
    13b. OFB-11 Oil Filter Base, -10 Ports, IO720 (1)
    13c. OFB-15 Oil Filter Base, -12 Ports, GO/GSO/IGSO 435/480/540 (1)
    14a. MS20822-8D 90° Fitting, O235-540 (1)
    14b. MS20822-10D 90° Fitting, IO720 (1)
    14c. MS20822-12D 90° Fitting, GO/GSO/IGSO 435/480/540 (1)
    14d. AN842-16D 90° Fitting, W670 (1)
    15a. MS20823-8D 45° Fitting, O235-540 (1)
    15b. MS20823-10D 45° Fitting, IO720 (1)
    15c. MS20823-12D 45° Fitting, GO/GSO/IGSO 435/480/540 (1)
    15d. AN844-16D 45° Fitting, W670 (1)
    16a. AN816-8D Nipple, Flared Tube, O235-540 (Opt)
    16b. AN816-10D Nipple, Flared Tube, IO720 (Opt)
    16c. AN816-12D Nipple, Flared Tube, GO/GSO/IGSO 435/480/540 (Opt)
    16d. AN840-16D Nipple, W670 (Opt)
    17. OFS-10 Oil Filter Stud (1)
    18a. AFC-500 Oil Filter, Std. or Equivalent [Champion CH48108] (1)
    18b. AFC-600 Oil Filter, Long or Equivalent [Champion CH48109] 1
    19a. F13000008-0xxz Titeflex® Firesleeved Teflon Hose, [-8], O235-540 (Opt)
    19b. F13000010-0xxz Titeflex® Firesleeved Teflon Hose, [-10], IO720 (Opt)
    19c. F13000012-0xxz Titeflex® Firesleeved Teflon Hose, [-12], GO/GSO/IGSO 435/480/540 (Opt)
    20a. AE7010000H0xxz Aeroquip® Hose Assy, [-8], O235-540 (Opt)
    20b. AE7010000J0xxz Aeroquip® Hose Assy, [-10], IO720 (Opt)
    20c. AE7010000K0xxz Aeroquip® Hose Assy, [-12], IGO/GSO/IGSO 435/480/540 (Opt)
    20d. MIL6000-1-25 MIL 6000 Hose, 25" Long, [Stearman] (2)
    20e. MIL6000-3/4-25 MIL 6000 Hose, 25" Long, [Waco] (2)
    21. AN4-5A Bolts (6)
    22. AN960-416 Flat Washers (16)
    23. MS20365-428A Locknuts (6)
    24. DBL-10 Doubler Plate (1)
    25. OTA-527 Oil Temp Adapter (Opt)
    26. CAP-1350 Bypass Valve Cap (Opt)
    27. LYC-12 Full Flow Engine Adapter-Engine Mounted (1)
    28. PLT-200 2" Adapter Plate (1)
    29. AN74A-6 Drilled Head Bolts (4)
    30. MS35333-40 1/4" Star Washer (8)
    31. 56707 Loctite® 567 PST Teflon Thread Sealant (1)
    32. AFC-K007-II Installation Instructions, Generic (1)
    33. AFC-K007-MI Instructions for Continued Airworthiness (1)
    34. AFC-K007-PL Parts List (1)

    Product Details

    For engines with existing oil filter on rear of accessory case. Lycoming powered Single and Multi Engine Fixed Wing Aircraft less than 450hp. having firewalls of .021 ASTM A527 galvanized steel or equivalent. Drawing: AFC-K007. Revision: A. Date: 10/01/02. STC # (SA00024NY)

    The Airwolf Remote Mount Filter Kit is conveniently installed at the upper right-hand corner of the firewall, right behind the oil cooler. It is out of sight, but easy to get to and service. Oil changes will now take just 20 minutes, with no mess. The Airwolf Adaptor replaces the original oil screen, putting an end to the difficult job of cleaning the screen every 25 hours. In fact, with our filter kit, Lycoming allows you to extend your oil change intervals from 25 hours to 50 hours.

    Our new stainless steel hoses replace the existing hard line oil cooler lines. All helicopter kits include TSO'd hoses.

    Located directly ahead of the oil cooler, the filter prevents your oil cooler from becoming a "trash collector."

    • Full Flow
    • Easy To Install
    • Extends Engine Life
    • Drops oil temps 20°
    • Total Weight under 5 lbs.
    • Extend oil changes to 50hrs.
    • FAA / PMA Approved
    • Ends messy oil changes.
    • Change your oil in minutes instead of hours.
    • Protects your $11,000 fan shaft pinion gear.
    Lycoming Engines
    STC'd for ALL aircraft powered by O-235 through IO-720 Lycoming Engines. Perfect for tight installations in ALL aircraft manufactured by:
    • Aviat Husky
    • Beech
    • Bellanca
    • Cessna
    • Grumman
    • Excalibur
    • Maule
    • Mooney
    • Piper
    • Pitts
    • Taylorcraft
    • And many others.
    Typical kit weighs less than 5 pounds. The oil filter is conveniently mounted on the firewall, right-side up, where it makes oil changes a simple, no mess process. All AIRWOLF kits mount to your existing accessory case. Our lightweight 4 ounce adapter replaces outdated oil screens. Your Vernatherm and Oil Temperature Probe transfer into our adapter.

    Continental Engines
    STC'd for ALL aircraft powered by A50 through IO550 Continental Engines. Perfect for tight installations in ALL aircraft manufactured by:

    • Aeronca
    • Aircoupe
    • Beech
    • Bellanca
    • Cessna
    • Luscombe
    • Maule
    • Meyer
    • Mooney
    • Navion
    • Piper
    • Twin Commander
    • And many others

  • P/N AFC-K008-A fits A50, A65, A75
  • P/N AFC-K008-A fits C75, C85, C90, C125, O-200
  • P/N AFC-K008-B fits C145, O300, GO300, IO360
  • P/N AFC-K008-C fits O470, IO470, IO520, TSIO520, GTS10520
  • P/N AFC-K008-E fits E-165, E-185, E-205, E-225

    Franklin Engines
    Our kits are designed to be installed on Stinson, Maule, Hiller, Bell 47, Republic, and Bellanca Aircraft with Franklin Engines. Bell, Hiller, Enstrom, Robinson, Hughes, Schweizer Engines, Flight Schools, Police Departments, Power Line Patrols, and Private Owners. You owe it to yourself and your helicopter to install the Remote Mounted oil filters by Airwolf Filter Corp.

  • Product Attributes

    Country of Origin
    United States
    Shipping Weight
    5 pounds
    UOM
    Kit
    Manufacturer P/N
    AFC-K007-F  
    Pack Quantity
    1

    Other Part Numbers

    Index Part Number Description Quantity
    01a. LYC-10 Full Flow Engine Adapter, All O235-540 except below (1)
    01b. LYC-11 Full Flow Engine Adapter, IO720 (1)
    01c. OFB-12 Full Flow Engine Adapter, Single Drive Dual Mags [Old Style] (1)
    01d. OFB-17 Full Flow Engine Adapter,Single Drive Dual Mags [New Style] (1)
    01e. M83248/1-230 "O" Ring, Viton, Single Drive Dual Mags [New Style] (1)
    01f. AN919-15D-SP Fitting, Reducer, -10 -> -8 Single Drive Dual Mags [New Style] (2)
    02a. 61173 Adapter Base Gasket, O235-540 (1)
    02b. 12777 Adapter Base Gasket, IO720 (1)
    02c. 12776 Adapter Base Gasket, IO720 (1)
    03a. PLT-28775 Adapter Plate, IO720 (1)
    03b. PLT-12999 Restrictor Plate, O235 (1)
    04a. AN837-8D Bulkhead Fitting-45°, O235-540 (2)
    04b. AN833-8D Bulkhead Fitting-90°, O235-540 (Opt)
    04c. AN815-8D Union, O235-540 (Opt)
    05a. AN837-10D Bulkhead Fitting-45°, IO720 (2)
    05b. AN833-10D Bulkhead Fitting-90°, IO720 (Opt)
    05c. AN815-10D Union, IO720 (Opt)
    06a. AN6289-8D Bulkhead Nut, O235-540 (2)
    06b. AN6289-10D Bulkhead Nut, IO720 (2)
    07a. MS28773-08 Boss Gasket, Teflon, O235-540 (2)
    07b. MS28773-10 Boss Gasket, Teflon, IO720 (2)
    08a. MS9387-08 “O” Rings, Viton, O235-540 (2)
    08b. MS9387-10 “O” Rings, Viton, IO720 (2)
    09. MS35769-11 Gasket, Oil Temperature Sensor (1)
    10. MS35769-21 Gasket, Thermostatic Valve (1)
    11. AN4H-4A Bolts, Drilled Head (4)
    12a. OFM-10 Horizontal Oil Filter Mount Plate (1)
    12b. OFM-11 Vertical Oil Filter Mount Plate (1)
    13a. OFB-10 Oil Filter Base, -8 Ports, O235-540 (1)
    13b. OFB-11 Oil Filter Base, -10 Ports, IO720 (1)
    13c. OFB-15 Oil Filter Base, -12 Ports, GO/GSO/IGSO 435/480/540 (1)
    14a. MS20822-8D 90° Fitting, O235-540 (1)
    14b. MS20822-10D 90° Fitting, IO720 (1)
    14c. MS20822-12D 90° Fitting, GO/GSO/IGSO 435/480/540 (1)
    14d. AN842-16D 90° Fitting, W670 (1)
    15a. MS20823-8D 45° Fitting, O235-540 (1)
    15b. MS20823-10D 45° Fitting, IO720 (1)
    15c. MS20823-12D 45° Fitting, GO/GSO/IGSO 435/480/540 (1)
    15d. AN844-16D 45° Fitting, W670 (1)
    16a. AN816-8D Nipple, Flared Tube, O235-540 (Opt)
    16b. AN816-10D Nipple, Flared Tube, IO720 (Opt)
    16c. AN816-12D Nipple, Flared Tube, GO/GSO/IGSO 435/480/540 (Opt)
    16d. AN840-16D Nipple, W670 (Opt)
    17. OFS-10 Oil Filter Stud (1)
    18a. AFC-500 Oil Filter, Std. or Equivalent [Champion CH48108] (1)
    18b. AFC-600 Oil Filter, Long or Equivalent [Champion CH48109] 1
    19a. F13000008-0xxz Titeflex® Firesleeved Teflon Hose, [-8], O235-540 (Opt)
    19b. F13000010-0xxz Titeflex® Firesleeved Teflon Hose, [-10], IO720 (Opt)
    19c. F13000012-0xxz Titeflex® Firesleeved Teflon Hose, [-12], GO/GSO/IGSO 435/480/540 (Opt)
    20a. AE7010000H0xxz Aeroquip® Hose Assy, [-8], O235-540 (Opt)
    20b. AE7010000J0xxz Aeroquip® Hose Assy, [-10], IO720 (Opt)
    20c. AE7010000K0xxz Aeroquip® Hose Assy, [-12], IGO/GSO/IGSO 435/480/540 (Opt)
    20d. MIL6000-1-25 MIL 6000 Hose, 25" Long, [Stearman] (2)
    20e. MIL6000-3/4-25 MIL 6000 Hose, 25" Long, [Waco] (2)
    21. AN4-5A Bolts (6)
    22. AN960-416 Flat Washers (16)
    23. MS20365-428A Locknuts (6)
    24. DBL-10 Doubler Plate (1)
    25. OTA-527 Oil Temp Adapter (Opt)
    26. CAP-1350 Bypass Valve Cap (Opt)
    27. LYC-12 Full Flow Engine Adapter-Engine Mounted (1)
    28. PLT-200 2" Adapter Plate (1)
    29. AN74A-6 Drilled Head Bolts (4)
    30. MS35333-40 1/4" Star Washer (8)
    31. 56707 Loctite® 567 PST Teflon Thread Sealant (1)
    32. AFC-K007-II Installation Instructions, Generic (1)
    33. AFC-K007-MI Instructions for Continued Airworthiness (1)
    34. AFC-K007-PL Parts List (1)

    Downloads

    For engines with existing oil filter on rear of accessory case. Lycoming powered Single and Multi Engine Fixed Wing Aircraft less than 450hp. having firewalls of .021 ASTM A527 galvanized steel or equivalent. Drawing: AFC-K007. Revision: A. Date: 10/01/02. STC # (SA00024NY)

    The Airwolf Remote Mount Filter Kit is conveniently installed at the upper right-hand corner of the firewall, right behind the oil cooler. It is out of sight, but easy to get to and service. Oil changes will now take just 20 minutes, with no mess. The Airwolf Adaptor replaces the original oil screen, putting an end to the difficult job of cleaning the screen every 25 hours. In fact, with our filter kit, Lycoming allows you to extend your oil change intervals from 25 hours to 50 hours.

    Our new stainless steel hoses replace the existing hard line oil cooler lines. All helicopter kits include TSO'd hoses.

    Located directly ahead of the oil cooler, the filter prevents your oil cooler from becoming a "trash collector."

    • Full Flow
    • Easy To Install
    • Extends Engine Life
    • Drops oil temps 20°
    • Total Weight under 5 lbs.
    • Extend oil changes to 50hrs.
    • FAA / PMA Approved
    • Ends messy oil changes.
    • Change your oil in minutes instead of hours.
    • Protects your $11,000 fan shaft pinion gear.
    Lycoming Engines
    STC'd for ALL aircraft powered by O-235 through IO-720 Lycoming Engines. Perfect for tight installations in ALL aircraft manufactured by:
    • Aviat Husky
    • Beech
    • Bellanca
    • Cessna
    • Grumman
    • Excalibur
    • Maule
    • Mooney
    • Piper
    • Pitts
    • Taylorcraft
    • And many others.
    Typical kit weighs less than 5 pounds. The oil filter is conveniently mounted on the firewall, right-side up, where it makes oil changes a simple, no mess process. All AIRWOLF kits mount to your existing accessory case. Our lightweight 4 ounce adapter replaces outdated oil screens. Your Vernatherm and Oil Temperature Probe transfer into our adapter.

    Continental Engines
    STC'd for ALL aircraft powered by A50 through IO550 Continental Engines. Perfect for tight installations in ALL aircraft manufactured by:

    • Aeronca
    • Aircoupe
    • Beech
    • Bellanca
    • Cessna
    • Luscombe
    • Maule
    • Meyer
    • Mooney
    • Navion
    • Piper
    • Twin Commander
    • And many others

  • P/N AFC-K008-A fits A50, A65, A75
  • P/N AFC-K008-A fits C75, C85, C90, C125, O-200
  • P/N AFC-K008-B fits C145, O300, GO300, IO360
  • P/N AFC-K008-C fits O470, IO470, IO520, TSIO520, GTS10520
  • P/N AFC-K008-E fits E-165, E-185, E-205, E-225

    Franklin Engines
    Our kits are designed to be installed on Stinson, Maule, Hiller, Bell 47, Republic, and Bellanca Aircraft with Franklin Engines. Bell, Hiller, Enstrom, Robinson, Hughes, Schweizer Engines, Flight Schools, Police Departments, Power Line Patrols, and Private Owners. You owe it to yourself and your helicopter to install the Remote Mounted oil filters by Airwolf Filter Corp.

  • Product Attributes

    Country of Origin
    United States
    Shipping Weight
    5 pounds
    UOM
    Kit
    Manufacturer P/N
    AFC-K007-F  
    Pack Quantity
    1

    Other Part Numbers

    Index Part Number Description Quantity
    01a. LYC-10 Full Flow Engine Adapter, All O235-540 except below (1)
    01b. LYC-11 Full Flow Engine Adapter, IO720 (1)
    01c. OFB-12 Full Flow Engine Adapter, Single Drive Dual Mags [Old Style] (1)
    01d. OFB-17 Full Flow Engine Adapter,Single Drive Dual Mags [New Style] (1)
    01e. M83248/1-230 "O" Ring, Viton, Single Drive Dual Mags [New Style] (1)
    01f. AN919-15D-SP Fitting, Reducer, -10 -> -8 Single Drive Dual Mags [New Style] (2)
    02a. 61173 Adapter Base Gasket, O235-540 (1)
    02b. 12777 Adapter Base Gasket, IO720 (1)
    02c. 12776 Adapter Base Gasket, IO720 (1)
    03a. PLT-28775 Adapter Plate, IO720 (1)
    03b. PLT-12999 Restrictor Plate, O235 (1)
    04a. AN837-8D Bulkhead Fitting-45°, O235-540 (2)
    04b. AN833-8D Bulkhead Fitting-90°, O235-540 (Opt)
    04c. AN815-8D Union, O235-540 (Opt)
    05a. AN837-10D Bulkhead Fitting-45°, IO720 (2)
    05b. AN833-10D Bulkhead Fitting-90°, IO720 (Opt)
    05c. AN815-10D Union, IO720 (Opt)
    06a. AN6289-8D Bulkhead Nut, O235-540 (2)
    06b. AN6289-10D Bulkhead Nut, IO720 (2)
    07a. MS28773-08 Boss Gasket, Teflon, O235-540 (2)
    07b. MS28773-10 Boss Gasket, Teflon, IO720 (2)
    08a. MS9387-08 “O” Rings, Viton, O235-540 (2)
    08b. MS9387-10 “O” Rings, Viton, IO720 (2)
    09. MS35769-11 Gasket, Oil Temperature Sensor (1)
    10. MS35769-21 Gasket, Thermostatic Valve (1)
    11. AN4H-4A Bolts, Drilled Head (4)
    12a. OFM-10 Horizontal Oil Filter Mount Plate (1)
    12b. OFM-11 Vertical Oil Filter Mount Plate (1)
    13a. OFB-10 Oil Filter Base, -8 Ports, O235-540 (1)
    13b. OFB-11 Oil Filter Base, -10 Ports, IO720 (1)
    13c. OFB-15 Oil Filter Base, -12 Ports, GO/GSO/IGSO 435/480/540 (1)
    14a. MS20822-8D 90° Fitting, O235-540 (1)
    14b. MS20822-10D 90° Fitting, IO720 (1)
    14c. MS20822-12D 90° Fitting, GO/GSO/IGSO 435/480/540 (1)
    14d. AN842-16D 90° Fitting, W670 (1)
    15a. MS20823-8D 45° Fitting, O235-540 (1)
    15b. MS20823-10D 45° Fitting, IO720 (1)
    15c. MS20823-12D 45° Fitting, GO/GSO/IGSO 435/480/540 (1)
    15d. AN844-16D 45° Fitting, W670 (1)
    16a. AN816-8D Nipple, Flared Tube, O235-540 (Opt)
    16b. AN816-10D Nipple, Flared Tube, IO720 (Opt)
    16c. AN816-12D Nipple, Flared Tube, GO/GSO/IGSO 435/480/540 (Opt)
    16d. AN840-16D Nipple, W670 (Opt)
    17. OFS-10 Oil Filter Stud (1)
    18a. AFC-500 Oil Filter, Std. or Equivalent [Champion CH48108] (1)
    18b. AFC-600 Oil Filter, Long or Equivalent [Champion CH48109] 1
    19a. F13000008-0xxz Titeflex® Firesleeved Teflon Hose, [-8], O235-540 (Opt)
    19b. F13000010-0xxz Titeflex® Firesleeved Teflon Hose, [-10], IO720 (Opt)
    19c. F13000012-0xxz Titeflex® Firesleeved Teflon Hose, [-12], GO/GSO/IGSO 435/480/540 (Opt)
    20a. AE7010000H0xxz Aeroquip® Hose Assy, [-8], O235-540 (Opt)
    20b. AE7010000J0xxz Aeroquip® Hose Assy, [-10], IO720 (Opt)
    20c. AE7010000K0xxz Aeroquip® Hose Assy, [-12], IGO/GSO/IGSO 435/480/540 (Opt)
    20d. MIL6000-1-25 MIL 6000 Hose, 25" Long, [Stearman] (2)
    20e. MIL6000-3/4-25 MIL 6000 Hose, 25" Long, [Waco] (2)
    21. AN4-5A Bolts (6)
    22. AN960-416 Flat Washers (16)
    23. MS20365-428A Locknuts (6)
    24. DBL-10 Doubler Plate (1)
    25. OTA-527 Oil Temp Adapter (Opt)
    26. CAP-1350 Bypass Valve Cap (Opt)
    27. LYC-12 Full Flow Engine Adapter-Engine Mounted (1)
    28. PLT-200 2" Adapter Plate (1)
    29. AN74A-6 Drilled Head Bolts (4)
    30. MS35333-40 1/4" Star Washer (8)
    31. 56707 Loctite® 567 PST Teflon Thread Sealant (1)
    32. AFC-K007-II Installation Instructions, Generic (1)
    33. AFC-K007-MI Instructions for Continued Airworthiness (1)
    34. AFC-K007-PL Parts List (1)