-
Aeronautical Standard AN5-11A Steel Undrilled Shank & Head Bolt, Machine - 100/Pack
PART #: SGP89647-X100MFR PART #: AN5-11AOur Price: $46.00 (100/Pack)QTY: Add to Cart -
Aeronautical Standard AN3-4A Steel Undrilled Shank & Head Bolt, Machine - 100/Pack
PART #: SGP89262-X100MFR PART #: AN3-4AOur Price: $12.00 (100/Pack)QTY: Add to Cart -
Aeronautical Standard AN176-12A Steel Undrilled Shank & Head Bolt, Close Tolerance - 10/Pack
PART #: SGP89085-X10MFR PART #: AN176-12AOur Price: $151.80 (10/Pack)QTY: Add to Cart -
Military Standard MS9089-14 Bolt, Externally Relieved Body
PART #: SGP138619MFR PART #: MS9089-14Our Price: $5.22 (Each)QTY: Add to Cart -
Military Standard MS9089-24 Bolt, Externally Relieved Body
PART #: SGP138620MFR PART #: MS9089-24Our Price: $4.14 (Each)QTY: Add to Cart -
Military Standard MS9089-10 Bolt, Externally Relieved Body
PART #: SGP138618MFR PART #: MS9089-10Our Price: $4.37 (Each)QTY: Add to Cart -
Military Standard MS9089-06 Bolt, Externally Relieved Body
PART #: SGP138617MFR PART #: MS9089-06Our Price: $1.05 (Each)QTY: Add to Cart -
Aeronautical Standard AN4C17A Stainless Steel Undrilled Shank & Head Bolt, Machine - 25/Pack
PART #: SGP89590-X25MFR PART #: AN4C17AOur Price: $115.50 (25/Pack)QTY: Add to Cart -
Aeronautical Standard AN4C23A Stainless Steel Undrilled Shank & Head Bolt, Machine - 5/Pack
PART #: SGP89596-X5MFR PART #: AN4C23AOur Price: $51.05 (5/Pack)QTY: Add to Cart -
National Aerospace Standard NAS6603-1 Steel, Bolt, Shear
PART #: SGP142523MFR PART #: NAS6603-1Our Price: $0.60 (Each)QTY: Add to Cart -
National Aerospace Standard NAS6603-10 Steel, Bolt, Shear
PART #: SGP142524MFR PART #: NAS6603-10Our Price: $0.57 (Each)QTY: Add to Cart -
National Aerospace Standard NAS6603-11 Steel, Bolt, Shear
PART #: SGP142525MFR PART #: NAS6603-11Our Price: $0.57 (Each)QTY: Add to Cart
Perhaps the most widely known piece of hardware is the bolt, but if you were asked what one is, could you answer it? Skygeek would.
Bolts are simply threaded fasteners. Aircraft contain countless parts and these parts must frequently be either dismantled and/or replaced. Securing or fastening adjacent parts together (forming a joint) is sometimes achieved by using rivets. However, it is often more practical to use bolts, especially when greater strength and rigidity are required. Bolts are different from other threaded fasteners— like screws—in that they must be screwed into a nut and subsequently tightened by turning it. Turning bolts with right-handed threads requires a clockwise direction; left-handed threads a counter-clockwise direction. Unlike screws, bolts generally have a shorter threaded section and a relatively longer grip length.
The anatomy of a bolt will help you identify and select the right one for a certain application. When using a bolt, keep in mind the following parts (refer to the corresponding diagram): length, diameter, grip, threads, head width and head thickness. The head comes in many styles (e.g. hex, clevis, eyebolt). The part not including the head is called the shaft. Length measures the distance from the bottom of the head to the bottom of the shaft. Diameter refers to the thickness of the shaft. The grip is considered the unthreaded part of the shaft; it runs from the bottom of the head to the beginning of the thread.
Another factor in determining the right bolt is composition. Bolts are usually made of metal such as (Corrosion-resistant, or CRES) steel or aluminum alloy. In addition, bolts often have finishes or surface treatments—cadmium and chromate being two of them.
Most bolts conform to a variety of standards: Air Force/Navy (AN), National Aircraft Standard (NAS), and Military Standard (M or MS). SkyGeek carries an extensive and growing list of series of bolts that meet or exceed these standards. Click on the specific series that suits your needs.